What is an inductor and how to name the inductor?
On 2018-12-01 10:15:15 in Inductor
How to detect , repair and replace inductance the ordinary coil?
On 2018-12-01 09:58:56 in Inductor
How to distinguish between shielded and unshielded?
On 2018-11-21 10:50:00 in Generally electronic semiconductor
The shielded inductor has a magnetic shielding structure on the outside, so it can be seen from the appearance that the coil winding must be an unshielded inductor, and the shielded inductor does not see the coil winding from the appearance. ...
how to detect the transient voltage suppression diode?
On 2018-10-26 17:00:00 in Generally electronic semiconductor
using a multimeter RX 10kilo-ohm for a monopole type TVS,the positive and reverse resistors can be measured by measuring ordinary diodes ...
What is a transient voltage suppressor diode ( TVS )?
On 2018-10-26 16:57:28 in Relays
Transient voltage suppressor diode is a new type of overvoltage safety protection device. The utility model has the advantages of small size ...
how to detect the LED emission tube?
On 2018-10-26 16:31:21 in Memory
The use of multimeter to detect LED luminous platoon is mainly to check whether the LEDs are good ...
How to identify and detect common diodes?
On 2018-10-26 15:48:50 in IC Chips
Intuitive judgment. Some of the circuit symbols are printed on the diode to indicate polarity; one end of the negative pole of the diode is printed with a color ring as a negative mark ...
Integrated circuit socket
On 2018-08-24 10:46:22 in Relays
Connectors are used to connect cables or electronic devices that can be repeatedly connected and separated. ...
What are the FPGA radiation effects and their effects?
On 2023-08-12 13:26:57 in IC Chips
What is the difference and relationship between ASIC and FPGA?
On 2023-06-09 13:29:35 in IC Chips
What is the development status and trend of led display?
On 2021-12-06 10:37:19 in Discrete Semiconductor
What is the difference between different panels?
On 2021-10-22 11:13:25 in Generally electronic component
What are the applications of waterproof connectors, waterproof connectors, and waterproof cables?
On 2021-07-31 10:55:20 in Connector
What are the applications of nuclear batteries?
On 2021-07-29 11:16:58 in Photoelectric
Do you know how is the green laser produced?
On 2021-04-12 10:44:40 in Crystals Oscillators/Resonators
What are the technical applications of embedded splicing controllers?
On 2021-03-05 10:44:16 in Generally electronic semiconductor
What are the whole bridge and rectifier diode?
On 2019-09-03 10:02:32 in Generally electronic component
How do filter capacitors and common mode inductors eliminate electromagnetic interference?
On 2019-08-12 10:30:07 in Capacitors
Integrate the clock generator into the microcontroller
On 2019-05-07 16:33:50 in Knownlege
Accurate clock signals are a prerequisite for reliable communication - whether by radio or by wire. With the ever-increasing demand for data transmission, the previous approach has reached its limit. ...
When using resistance and line on-off test mode of the automotive digital multimeter.
On 2019-04-22 14:33:41 in Knownlege
This article write about when using resistance and line on-off test mode of the automotive digital multimeter.The correct method of choosing gear and connecting detection line is adopted. ...
How to use a mechanical multimeter?
On 2019-01-27 14:43:12 in Technology
Headphones and piezoceramic buzzers
On 2019-01-05 13:30:31 in Generally electronic component
Integrated circuit
On 2019-01-04 14:50:02 in IC Chips
How to use a digital multimeter?
On 2018-12-28 14:41:08 in Technology
IGBT and IGBT modules
On 2018-12-28 11:47:49 in Generally electronic semiconductor
Quartz resonator(crystal oscillator)
On 2018-12-27 14:23:56 in Generally electronic component
How to identify and detect relays?
On 2018-12-20 14:13:55 in Relays
What are the main parameters and types of LEDs and how to detect LED?
On 2018-12-14 13:55:28 in Photoelectric
Design dimensions of printed conductors and holes for pad
On 2018-12-13 11:19:14 in Knownlege
Welding of printed circuit boards
On 2018-12-13 10:45:44 in Technology
Basic operation steps of manual welding
On 2018-12-11 13:39:56 in Technology
Basic operation steps of manual welding
On 2018-12-04 10:23:27 in Knownlege
Output Curve of Field Effect Transistor
On 2018-11-23 10:36:28 in Memory
If the internal resistance of the test voltage is also very small, the tube will burst undoubtedly. ...
Headphones and piezoceramic buzzers
On 2018-11-03 15:17:06 in Memory
Headset is also an electro-acoustic conversion device,which is similar in structure to an electric speaker,it is also composed of magnet,voice coil,vibrating diaphragm, etc,but the voice coil of the earphone is mostly fixed ...
The structure and properties of quartz crystal elements
On 2018-11-03 13:39:16 in Question
The quartz crystal element is composed of a quartz wafer,a wafer bracket and a case.The role of the quartz crystal element in the circuit is equivalent to a high Q value LC resonant element ...
The main parameters of LED
On 2018-10-31 11:11:54 in Memory
The main parameters of LED include the maximum working current Im and the maximum reverse voltage Um ...
How to identify and detect transistors?
On 2018-10-27 10:56:39 in Generally electronic semiconductor
Characteristics of digital logic gate circuit
On 2018-08-23 11:25:16 in Sensor
The core idea of digital electronic technology is binary logic. In logic algebra, 0 and 1 do not represent the size ...
Signal Integrity and Electromagnetic Interference Treatment in PCBA Design
On 2023-08-15 14:12:05 in PCBA
In the PCBA (Printed Circuit Board Assembly) design process, signal integrity and electromagnetic interference processing are crucial. This article will introduce the concept of signal integrity in PCBA design, influencing factors and processing methods, ...
Soldering Technology and Process in PCBA Assembly
On 2023-07-22 16:10:51 in PCBA
In the PCBA (Printed Circuit Board Assembly) assembly process, the selection of soldering technology and process is crucial to ensure soldering quality and improve product reliability. This article will introduce the soldering techniques commonly used in ...