100YXG27MEFC8X11.5

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.512" (13.00mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	0.138" (3.50mm)
Impedance:	630 mOhms
Ripple Current @ High Frequency:	232mA @ 100kHz
Ripple Current @ Low Frequency:	97.44mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	YXG
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	4000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	100V
Tolerance:	±20%
Capacitance:	27µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

---

Aluminum Electrolytic Capacitors are a type of capacitors with two metallic surfaces with a thin layer of oxide film between them as the dielectric. The 100YXG27MEFC8X11.5 is a type of Aluminum Electrolytic Capacitor. As a polarized capacitor, it consists of two electrodes and a non-polar resin wrap. The positive electrode is made of aluminum foil and the negative electrode is in form of electrode foil, which consists of a layer of insulating matter, an activation layer, and a carbon layer. The oxide layer acts as the dielectric layer between the two electrodes.The 100YXG27MEFC8X11.5 has broad application fields. It is mostly used in many main circuits of electronic equipments, such as radios, TVs, audio, transistor amplifiers, and power supplies, and is also especially suitable for audio filter and oscillator of circuit. Besides, it can be also used for broadband filtering, waveform smoothing, and peak clamping. In industrial applications, the 100YXG27MEFC8X11.5 capacitor can be used in frequency converters, switching power supplies, UPS, servo systems, and other equipment in which current and voltage fluctuations occur.The working principle of the 100YXG27MEFC8X11.5 is based on the principle of capacitor storage. When the capacitor is connected between two electrodes and a DC voltage is applied, electrons from the negative plate flow through the electrolyte to the positive plate. Since the oxide layer acts as a dielectric, the capacitor stores electrical charge proportional to the voltage applied. When the DC voltage is removed, the capacitor holds the charge, keeping the voltage constant. The interval between the applied DC voltages is called the time constant.The most common type of Aluminum Electrolytic Capacitor has an electrolyte that is made of liquid then sealed in an organic solvent. The electrolyte has a high conductivity and when it is in contact with the aluminum anode, it forms a thin oxide layer on the surface of the aluminum. This oxide layer serves as the dielectric between the electrodes and can increase the capacitance substantially greater than the value of plain aluminum. As the oxide layer increases, the capacitance increases, and can reach values of 10,000 µF or even higher. The heat generated from current and voltage surges, however, can cause the electrolyte to evaporate, decreasing the capacitance.The 100YXG27MEFC8X11.5 capacitor is a highly reliable aluminum electrolytic capacitor used for a range of applications. It is a polarized capacitor, meaning that the leads to it are marked with polarity and orientation. The leads are also relatively short, so it is important to choose the correct mounting technique. In order to enhance performance, it is also important to maintain a suitable storage temperature and humidity within the specified range, as these environmental conditionscan reduce the life of the capacitor. Lastly, it is important to coordinate the capacitor with other components of the circuit and supply voltage in order to ensure stability of the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description