|Allicdata Part #:||
Discrete Semiconductor Products
|Short Description:||DIODE ZENER 220V 10W DO213AA|
|More Detail:||Zener Diode 220V 10W ±5% Chassis, Stud Mount DO-21...|
|100 +:||$ 15.33260|
|Voltage - Zener (Nom) (Vz):||220V|
|Power - Max:||10W|
|Impedance (Max) (Zzt):||250 Ohms|
|Current - Reverse Leakage @ Vr:||10µA @ 135V|
|Voltage - Forward (Vf) (Max) @ If:||1.5V @ 2A|
|Operating Temperature:||-65°C ~ 175°C|
|Mounting Type:||Chassis, Stud Mount|
|Package / Case:||DO-203AA, DO-4, Stud|
|Supplier Device Package:||DO-213AA|
|Base Part Number:||1N3013|
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: email@example.com
The 1N3013B diode is part of the Zener diode series, and it falls under the category of single diodes. This diode is known for its stable characteristic behavior over wide ranges of temperature, current and power levels. As such, it is used in a variety of applications, ranging from precision voltage regulation to power clipping and signal mixing. In addition, the 1N3013B diode can be used to provide a constant source of current, voltage drop and distributed capacitance.
The 1N3013B is a double-serial connected P-N junction diode packaged in a miniature glass case. It has a junction breakdown voltage of 13Volts (13V), a maximum regulating voltage of 13.5V and a constant temperature variation rate of 0.005V/C. It is also rated for a reverse leakage current of up to 5mA at 25 degrees Celsius and for a total power dissipation of 375mW (0.375W).
For typical applications, the 1N3013B diode is usually connected with an external current limiting resistor in series with the anode and the cathode. This setup can be used to provide a regulated voltage output at a predetermined power level. The 1N3013B can also be used in conjunction with switching regulators to provide a stable output voltage in response to the input voltage.
Additionally, the 1N3013B diode can be used to generate a constant current source. This is done by connecting the diode in series with a constant current source and connecting the anode and the cathode to the positive and negative sides of the power source respectively. The constant current source will then flow through the diode and be limited by its forward voltage drop.
The 1N3013B diode is also used in power clipping and signal mixing applications. In power clipping applications, the diode is used in combination with an over-voltage protection circuit to limit the output voltage of the power source. This function can be used to protect sensitive electronic components from damage due to over-voltage spikes in the power source. In signal mixing applications, the 1N3013B can be used as a voltage regulator to reduce the amplitude of signals in order to achieve desired levels of power.
The 1N3013B diode is also used in distributed capacitance applications, where it is connected in series with an external capacitor. This setup provides a distributed capacitance across the two components, enabling it to condition a signal at the desired frequency. By utilizing the distributed capacitance of the 1N3013B diode, noise and distortion levels can be improved significantly.
In summary, the 1N3013B diode belongs to the category of single diodes and is part of the Zener diode series. It is mainly used for precise voltage regulation, signal mixing and power clipping. Furthermore, the 1N3013B diode can also be used as a constant current source and for distributed capacitance applications.
The specific data is subject to PDF, and the above content is for reference