1N4004GPP TR

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	400V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	2µs
Current - Reverse Leakage @ Vr:	5µA @ 400V
Capacitance @ Vr, F:	8pF @ 4V, 1MHz
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-41
Operating Temperature - Junction:	-65°C ~ 175°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

1N4004GPP TR is a three-terminal device, a type of diode commonly used in many fields of electronics including power supplies, general rectification, and even logic circuits. It is the most widely used diode in the world because of its availability, low cost, and reliable performance. 1N4004GPP TR has other designations as well. It is sometimes known as a Germanium diode, as it is made up of germanium semiconductors. Another common designation is BAV99. It is also sometimes referred to as a standard Si diode.

Application Fields:

1N4004GPP TR is a rectifier diode, mainly used for rectification of AC voltage to a DC voltage. This means it converts AC voltage to a pulsating DC voltage, most often for power supplies. It is very commonly used in places where the rectified DC voltage will be further converted to regulated voltage, often through the use of power transistors. 1N4004GPP TR diode is mainly used in power electronics and AC/DC converters. It is fitting for power switches, relays, uninterruptable power supplies, solar panels, and high-power inverters. It can also be used in power supplies and various power electronics circuits, as well as audio amplifier circuit protection and motor switching circuits.

Working Principle:

1N4004GPP TR works by using a current flow through the PN junction between the two semiconductors, either from anode to cathode or from cathode to anode. In the forward-biased direction, when the anode is positive and the cathode is negative, current starts to flow from the anode to the cathode. In reverse bias, the junction will be at zero potential, meaning no current will flow. In reverse bias, the diode acts as a switch and does not allow current to pass through the junction. This is the most important feature of the 1N4004GPP TR diode, and is what makes it suitable for most applications.

Conclusion:

1N4004GPP TR is one of the most widely used diodes in the world. It is highly suitable for rectification of AC voltage to DC voltage, usually for power supplies, inverters, and audio amplifiers. Its ability to switch in the reverse bias direction is what makes it so versatile for all these electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description