1N4005-TP

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	2µs
Current - Reverse Leakage @ Vr:	5µA @ 600V
Capacitance @ Vr, F:	15pF @ 4V, 1MHz
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-41
Operating Temperature - Junction:	-55°C ~ 150°C
Base Part Number:	1N4005

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

1N4005-TP is a rectifier diode, suitable for a variety of applications. It has a high current rating and carries a life expectancy of up to 100,000 hours of operation. This diode is often used to convert alternating current (AC) to direct current (DC) and acts as a bridge to prevent reverse-flow of a current. It is also found in almost all electronic devices due to its cost-effectiveness and reliability.

Application Field

The 1N4005-TP is a widely used rectifying diode with many applications. It can be used for all general-purpose rectification. It is also commonly used for power supplies, transformers, power antenna motors, AC-DC rectification, induction motors, and switching applications such as, radio frequency (RF) switches and pick up and control circuits.

Features and Performance

The 1N4005-TP is particularly convenient and effective due to its wide range of features and performance characteristics. It has a high forward current rating of 1A with a reverse voltage of up to 400V. Additionally, its low power loss allows it to operate as a switch while also providing superior low-noise waveform across a range of frequencies. The 1N4005-TP also runs with a small amount of heat, making it suitable for small applications that require minimal heat loss. It also has a fast recovery time, shorter than that of prior designs, allowing for faster switching speeds.

Working Principle

The 1N4005-TP functions by taking alternating current (AC) and transforming it into direct current (DC). This is done by means of a bridge rectifier circuit and it is controlled by a PN junction. This PN junction limits the flow of current and enables the conversion of current from AC to DC. Additionally, the diode has a high rating which prevents it from allowing any current to travel in the reverse direction. The diode has two stable states and changes its state depending on the voltage applied. When a positive voltage is applied, the diode remains in its low resistance, low forward bias state. However, when a negative voltage is applied, the diode switches to its high resistance, high reverse bias state. This, in turn, prevents any current from flowing, making it suitable for blocking AC signals.

Conclusion

The 1N4005-TP is a high-performance rectifier diode with a wide range of applications. It is an economical and reliable option for most applications that require a rectifier. The diode utilizes its PN junction to transform AC to DC, and its high rating prevents reverse-current flow. Thanks to its low power loss and fast recovery time, it is suitable for a variety of applications and is found in most electronic devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description