1N4007GPEHE3/73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A diode is an electronic device with two terminals, which allows current to flow only in one direction. It is known as a rectifier, because it converts alternating current (AC) to direct current (DC). 1N4007GPEHE3/73 is a type of single-phase silicon-controlled rectifier (SCR). It is used in applications such as power supply, lighting, motors, and other equipment.

The schematic symbol for the 1N4007GPEHE3/73 is a triangle, which signifies its three-terminal configuration. The anode is the positive terminal, the cathode is the negative terminal, and the gate terminal is the control terminal. The 1N4007GPEHE3/73 can handle a peak repetitive reverse voltage of 1000 volts, and a continuous forward current of 17A if mounted on a heatsink. In comparison to other diodes, it has a higher forward voltage drop and higher reverse leakage current.

The working principle of the 1N4007GPEHE3/73 is based on the principle of rectification, where AC current is converted to DC current. When the anode is positive with respect to the cathode, current flows through the device, allowing it to act as a switch. When the polarity of the voltage is reversed, the device is reverse biased and no current can flow through.

The 1N4007GPEHE3/73 is commonly used in power supplies to convert AC current to DC for powering devices and charging batteries. It is also used in AC-to-DC motor drives, automotive electronics, solid state relays, home appliances, and other systems where efficient power conversion is required. The device is also used in lighting applications to reduce the large pulses of current supplied to fluorescent or LED lighting systems.

The 1N4007GPEHE3/73 is also used in DC-to-DC conversion applications, where high-efficiency and reliable operation are key requirements. The device can be combined with other components such as inductors and capacitors to create converters and switched-mode power supplies which can step up or step down the DC supply voltage. It is also used in regenerative rectifiers, which store energy in the input capacitors to reduce ripple in the output when the voltage fluctuates.

The 1N4007GPEHE3/73 is a very versatile device that has a wide range of applications. Its three-terminal configuration allows for easy integration into electronic control systems, and its relatively high forward voltage drop and low reverse leakage current make it well suited for power conversion applications. Its efficient operation and robust nature make it a reliable choice for many different types of DC power supplies.

The specific data is subject to PDF, and the above content is for reference