1N5818-E3/73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes – Rectifiers – Single are semiconductor components used to convert AC signals to DC signals. They are made up of a small piece of p-type and n-type semiconductor material. The job of a diode is to allow electricity to flow in only one direction, creating rectified DC voltage. 1N5818-E3/73 is a type of diode used for low-power, low-current rectification applications. Here we will discuss the application field and working principle of 1N5818-E3/73.

1N5818-E3/73 is a 1A Schottky rectifier diode with an maximum forward surge current up to 1A. It is designed to be used in low-voltage, low-current rectification applications. For example, it can be used in the output rectification of AC-DC converters or in the rectification of transformer-coupled motor drive circuits. It can also be used in other electrical circuits as a switching device. Moreover, 1N5818-E3/73 has a low reverse leakage current and high power efficiency. It also has high frequency performance and temperature coefficient.

The working principle of 1N5818-E3/73 is based on the flow of electrons. In a circuit, electrons are constantly moving from one point to another. When the electrons reach the junction between the n-type and p-type layers of a diode, one of two possibilities occur: either the electrons continue to flow or the flow stops. If the electrons continue to flow, then a current will be established in the circuit. This is called the forward bias of a diode. On the other hand, if the electrons are blocked, the flow of the current is blocked. This is known as the reverse bias of a diode.

In the forward bias state, the current flow constitutes electric charge, which is generated by the electric circuit and is known as the forward current of a diode. As a result, electric charge is built up in the diode and its voltage is maintained at a certain level. In the reverse bias state, the current flow is blocked so that no electric charge is built up in the diode, thereby preventing it from sending out additional current.

As the electric current flows through the 1N5818-E3/73, electric charge is generated and stored in the device. This is known as the electric field of the diode and it prevents the flow of electrons in the opposite direction. The electric field of 1N5818-E3/73 is strong enough to block off electric current in the reverse bias state, allowing only the current in the forward bias state to flow. In this way, 1N5818-E3/73 can be used effectively for the rectification of AC signals.

In conclusion, 1N5818-E3/73 is a 1A Schottky rectifier diode suitable for low-voltage, low-current rectification applications. It has a low reverse leakage and high power efficiency. Furthermore, it has a built-in electric field that prevents electric flow in the reverse bias state. Therefore, 1N5818-E3/73 can be effectively used for the rectification of AC signals.

The specific data is subject to PDF, and the above content is for reference