25LC080D-E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is an indispensable component in almost all electrical products. There are many choices of memory types on the market, such as NOR, NAND, and FRAM. among them, 25LC080D-E/MS is an 8-Kbit serial, non-volatile, EEPROM memory. It can store data and maintain long-term data integrity.

The 25LC080D-E/MS memory has a small form factor and a wide range of working voltages between 1.8 and 5.5V. It is composed of 8,192 EEPROM bits, which is organized into 1024 words of 8 bits each. All the data are stored in a 32 x 32 bit memory array and controlled using an internal state-machine. It supports few instruction sets, making it an ideal choice for applications where less active component count is desired.

It is easy to use with a very high data storage capacity that provides unlimited endurance and data retention of up to 25 years. There is a built-in self-timed write cycle that ensures reliable data storage without interruption. The typical write cycle time is 5ms and the write protection is enabled through hardware using the Write Protect (WP) pin. 25LC080D-E/MS can also be used as a low-voltage non-volatile memory with a serial interface.

The device has an 8-pin PDIP package that can be inserted horizontally or vertically on a printed circuit board. It has a 128-bit one-time programmable security code which prevents unauthorized access and includes an integrated Write Protect pin to enable and disable write operations.

In addition, the 25LC080D-E/MS is highly compatible and can be used in a wide range of applications such as industrial or consumer use, Automotive and Aerospace, Computer, and Networking. It can be used as a standalone device with self-contained commands or as a slave device connected to the host microcontroller.

The 25LC080D-E/MS memory operates using a three-wire serial interface protocol. This protocol consists of four instructions: Read, Write, High-Speed Read and High-Speed Write. The three-wire protocol requires a minimum of two lines for programming, power and ground. This makes it possible to interface with all kinds of microcontrollers, including I2C and SPI devices.

The 25LC080D-E/MS memory is ideal for storing data that needs to be accessed frequently. It is easy to use and it takes up a minimal amount of board space. It works with a wide range of operating voltages and it has several features that make it an ideal choice for a broad range of applications.

The specific data is subject to PDF, and the above content is for reference