25TTS08S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

A silicon-controlled rectifier (SCR) is an electrical device made of highly doped semiconductor material that can be turned on or off with a low voltage electrical control signal. The 25TTS08S is a low gate-trigger current SCR rated for up to 800 volts and up to 8 amperes of load current. It is commonly used in applications such as AC or DC motor speed or power control with either manual or logical inputs, switching of light dimmers, temperature controllers and alternators, and other industrial and consumer applications.

Application Field

The 25TTS08S SCRs are best suited for high frequency ac circuit applications involving resistive and capacitive loads, including: industrial motor control and speed control, low inductive load switching, lighting dimmers, appliance/heater control, and other commercial and consumer applications.

The 25TTS08S SCRs are especially suitable for inverter and AC voltage regulator applications, as the small size and low gate trigger current make them ideal for high frequency ac circuits with faster switching times. Manufacturers commonly use the 25TTS08S SCRs for temperature controllers, home appliances, electric motors, and power switches.

Working Principle

When a control voltage is applied to the gate lead of an SCR, the SCR will turn on, allowing current to flow through the device. When the gate voltage is removed, the SCR remains in the "on" condition until the current through the device is interrupted. This "latching" action makes SCRs especially useful in applications where on/off control is required.

The 25TTS08SCR can be considered a special type of thyristor consisting of an alternating-current (AC) latching gate for triggering, as well as a main anode and cathode for conducting electricity. When the gate trigger voltage is applied, the SCR turns "on" because current flows from anode to gate and then to the cathode. Once the SCR has been turned "on", the gate current allowed is reduced to a few microamperes, even if the gate voltage is removed. The device can only be turned "off" by cutting off the main current flow through the device, which causes the gate current to drop below the minimum level.

The 25TTS08S SCR has a low on-state voltage drop and can act as either an AC or DC control switch. This makes it an attractive option for applications such as AC motor speed and power control, switching light dimmers, temperature controllers, and other consumer and industrial applications.

Advantages

The 25TTS08S SCR has several advantages over other types of thyristors because it has a superior switching speed, low gate trigger current, and a low on-state voltage drop. It is suitable for high-frequency AC circuits and applications that require rapid switching. It is relatively inexpensive, compared to other types of thyristors. Additionally, it has a broad temperature range, which makes it suitable for applications that require wide temperature ranges.

The 25TTS08S SCR\'s small size and low gate-trigger current make it an excellent option for high-frequency AC circuits, with faster switching times compared to other types of components. Furthermore, these devices are available in both through-hole and surface mount packages, which makes them flexible for a variety of different applications.

Disadvantage

While the 25TTS08S SCR has many advantages, its major disadvantage is that it needs to be manually reset after every "off" event. This means that some applications that require repeating off/on cycles may require the use of a timer. Additionally, the device can be quite sensitive to overvoltage and transient conditions, prompting users to take appropriate precautions.

The specific data is subject to PDF, and the above content is for reference