2N2329AS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

2N2329AS is an interface between semiconductor devices and circuit boards. It is a two-plate hard disk-type power thyristor, more commonly known as an SCR (silicon-controlled rectifier) or triac. As a thyristor, it is a type of semiconductor device which acts as a switch to control a high-power current. The 2N2329AS can be used in a number of different applications, including lighting and motor control, rectifiers and AC current controllers, voltage regulators, power supplies, high-voltage generators, monitors, and other electrical components.

2N2329AS thyristors are characterized by four terminals; a main anode, main cathode, gate, and cathode. An anode is a type of electrical element which is typically connected to a positive terminal, while the cathode is connected to a negative terminal. The gate is an extra lead connected to a control current or voltage, in order to control the flow of current. To turn the thyristor on, a positive gate current or voltage needs to be applied between the gate and cathode. Once the thyristor is on, it will remain on until the current between the anode and cathode drops to zero.

The working principle of the 2N2329AS is based on its four terminals. The 2N2329AS has the ability to detect and block small electrical current between its two main plates, the anode and cathode. It blocks any current from flowing from the anode to the cathode unless the gate receives a positive current or voltage. The gate forward bias is typically no more than a few volts in order for the 2N2329AS to turn on and block current from the main plate. The main plate has a much higher forward bias voltage, generally ranging from hundreds to thousands of volts.

One of the primary applications for the 2N2329AS is motor control. The thyristor acts as a switch in motor control circuits, turning on and off to control the speed of an AC or DC motor. The thyristor also works in AC phase shift control circuits and rectifiers, allowing continuous adjustment of the output waveform phase angle. 2N2329AS thyristors can also be used in lighting controls and power supplies, providing a switch to control the flow of current.

The 2N2329AS is an important component in any circuit that needs to control the flow of high-voltage or current. Its four basic components allow it to control the flow of current at various voltages and frequencies, making it an extremely versatile electrical device. Its ability to block and detect small electrical current makes it ideal for use in motor control, lighting control, rectifiers, and AC phase shift control circuits.

The specific data is subject to PDF, and the above content is for reference