2N2369

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N2369 is a type of bipolar junction transistor (BJT) typically used in linear amplifier circuits available in both through-hole and surface mount form factor. It is commonly used for medium current applications such as audio amplifiers, amplifiers for radio receivers and automotive audio amplifiers.

The transistor has two main junctions, connected together by a thin layer of base material which is responsible for controlling the current flow between them. In addition, two control electrodes, the base and the emitter, are connected to the two main junctions. When voltage is applied to the base and emitter of the transistor, it allows current to flow between the collector and emitter junctions. This ability of the transistor to control the current based on the base and emitter voltage makes it ideal for use as an amplifier.

The 2N2369 is a single-transistor type design, meaning it is composed of just one main junction and two required control electrodes. This allows the transistor to operate with lower power consumption and a lower noise level, making it easier to use in amplifier applications. The entire package of the transistor is usually mounted directly on the circuit board with the help of pins that make contact with the circuit board\'s conductive paths. This allows for a direct connection between the circuit and transistor.

The 2N2369 transistor can be used in many applications and can operate in both linear and switching modes. In linear applications it is used as an amplifier or buffer, while in switching applications it is used as an on/off switch or device driver. The transistor has a range of power levels, depending on the voltage and current levels used. For example, the 2N238 can support currents of up to 80 mA and voltages of up to 30V.

In order to use a 2N2369 transistor, the appropriate current and voltage inputs must be applied to the base and emitter to control the current between the collector and emitter junctions. The higher the current and voltage, the greater the gain of the transistor. Also, the voltage applied to the base and emitter must be higher than the voltage applied to the collector in order to keep the transistor in the “on” state. This allows the current to flow from the collector to the emitter and amplifies the input signal. Once the voltage applied to the collector reaches the same level as the voltage applied to the base and emitter, the transistor is in the “off” state and no current flows from the collector to the emitter.

There are several applications of the 2N2369 transistor including amplifiers, active switches, logic level converters and high-speed switching circuits. The 2N2369 is ideal for applications where low noise and a high operating current are required. The device is durable and reliable, making it an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference