2N3904TA

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Active
Transistor Type:	NPN
Current - Collector (Ic) (Max):	200mA
Voltage - Collector Emitter Breakdown (Max):	40V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 5mA, 50mA
Current - Collector Cutoff (Max):	--
DC Current Gain (hFE) (Min) @ Ic, Vce:	100 @ 10mA, 1V
Power - Max:	625mW
Frequency - Transition:	300MHz
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 (TO-226AA) (Formed Leads)
Supplier Device Package:	TO-92-3
Base Part Number:	2N3904

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N3904TA is a unit of bipolar transistors classified under the single type. It is a commonly used device which is manufactured by hundreds of manufacturers who adhere to common standards. The device is made up of three layers, an emitter, base and collector. The emitter has a thin layer of electrons, while the base is a thin insulating layer and the collector is a conductive layer.The device works by using the transfer of current between the emitter and the collector. The major components of the device include the emitter, collector and base. The base current is usually very small compared to the emitter to collector current. When the base current is increased, it causes a large increase in the current between the emitter and the collector. When the base current is decreased, it causes a large decrease in the current between the emitter and the collector. This effect is known as transistor action.The 2N3904TA has wide application areas in many industries and in different machines. It is widely used in amplifying and switching circuits such as linear amplifiers, oscillators, logic gates, inverters, and flip-flops. It is also used in audio amplifiers, RF amplifiers, computer interface circuits, and radio-frequency applications. The device is also used in different memory circuits and can be used in many power management applications.The device is also used in different motors, such as DC motors and stepper motors, and in relays used in lighting and HVAC systems. The device is typically used to switch on and off large loads. The base current can be adjusted to control the open and close times of the load.Another use of the device is in the form of DIY circuit boards. The device is a very cost effective part and can be used for making an array of simple circuits for home and hobby applications. With this device, a person can build his/her own remote controlled robots, sensors and other applications.The 2N3904TA is an efficient and reliable transistor device. It offers excellent reliability and robustness with the ability to function reliably in extreme environmental conditions and wide temperature range. The device also offers excellent protection against cable faults, reduces EMI/EMC interference, and has low distortion properties.The 2N3904TA is an excellent choice for many applications where high switching speed is necessary and low amplifier gain is desired. Because it is available in through hole, SMT and array packages, the 2N3904TA can be easily incorporated into any system. Its versatility and reliability make it a popular choice for many designers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description