2SD1535

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2SD1535 is an NPN transistor belonging to the family of single bipolar junction transistors (BJT). It is mainly used in the construction of amplifiers, drivers, switches and small logic circuits.

The 2SD1535 is a small signal switching transistor with a nine-volt NPN transistor. Its structure is comprised of three layers of semiconductor material and two electrical connections called the collector and emitter. When the base connection is "on", the current passes through the collector and emitter, thus acting as a switch. The signal gain of the device is fairly small but sufficient for most signal applications.

The 2SD1535 is primarily used for small signal switching in power supply circuits and for small, low current switching requirements. It is found commonly in electronic toys, such as remote-controlled cars, sound driver circuits, and low power robotic applications. In addition, it can be used as a low power amplifier in small audio applications and as a switch in digital logic circuits.

The 2SD1535 operating principle is based on the behavior of a majority carrier in the transistor. The majority carriers are electrons in the n-type layer of the transistor and holes in the p-type layer. The transistor works as an amplifier, which means it takes in a small current at the base, amplifies it at the collector and then a large current is output from the emitter. This is done by creating an electrical field across the base-emitter junction, when the base-emitter voltage is higher than the base-collector voltage. This causes electrons to flow from the emitter to the collector and completes the majority carrier current.

The2SD1535 can be operated in either a common emitter or a common base configuration. In the common emitter configuration, the emitter is connected to the ground, while the Collector and Base are used to form the input and output stages. The input stage is used to feed the amplified signal to the output stage, while the output stage amplifies the signal further. In the common base configuration, the base and collector are connected, while the emitter is placed at the input and output stages.

Overall, the 2SD1535 is an excellent example of a single bipolar junction transistor and its many applications in the field of amplifiers, drivers, and switching circuits. Its small size and simple operating principle make it particularly attractive for small signal switching applications and low power logic circuits.

The specific data is subject to PDF, and the above content is for reference