2SD1803T-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2SD1803T-E Application Field and Working Principle

2SD1803T-E is a type of transistor belonging to the bipolar junction transistor (BJT) single category. It is a switching device or amplifier used to amplify and switch electrical signals and electrical power.

2SD1803T-E can be configured as a common emitter amplifier or switch when used as an amplifier. This transistor is based on NPN (Negative Positive Negative) configuration, which consists of a P-type semiconductor sandwiched between two N-type semiconductors. As the semiconductor configurations, 2SD1803T-E has three pins: base, collector and emitter where current flows from the collector to the emitter when a voltage is applied to the base.

In terms of its functional applications, it is mainly used as a switching device in light emitting diodes (LED) lighting circuits, as they are capable of providing very fast switching operations due to their relatively low saturation voltage. It is also used in power transistor circuits because of its high current gain and high power dissipation. Furthermore, it is used in audio frequency applications due to its excellent frequency response and low noise characteristics.

In terms of its working principle, 2SD1803T-E works in two different operating modes, namely active and cut-off. In active mode, it works as an NPN transistor amplifying current; the voltage applied to the base is increased by an amount determined by the current ratio between the base and the collector. Furthermore, as the base current increases, the collector current also increases, namely the gain of the transistor.

On the other hand, in cut-off mode, the collector current is completely shut-off. As the voltage applied to the base drops below the cut-off voltage, no current flows between the collector and emitter terminals. Moreover, the voltage drop across the collector and emitter should remain constant regardless of the value of the applied base voltage.

In conclusion, 2SD1803T-E is an NPN transistor mainly used as a switching device in LED lighting circuits and power transistor circuits due to its high current gain and high power dissipation. Furthermore, it works in two different operating modes (active and cut-off) as a current amplifier in active mode and as a current blocker in cut-off mode.

The specific data is subject to PDF, and the above content is for reference