2SD1785

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2SD1785 is a single bipolar transistor. It belongs to the class of junction transistors and is typically used in numerous applications involving switching, amplification, and signal detection.

The 2SD1785 is constructed with an epitaxial base layer, allowing it to exhibit higher gain and better performance than regular transistors. It is made with a NPN structure, meaning it is an NPN type transistor, and can carry out both switching and amplification functions. Depending on the application, it can be used in either an open collector or closed collector configuration. Its main characteristics include a collector-emitter voltage of 35V, a collector current of 500mA, and a power dissipation of 600mW. In addition, it has a high frequency performance of up to 200MHz and a high gain bandwidth product of 22MHz.

The 2SD1785 consists of three terminals; base, collector, and emitter. The base terminal is the control terminal through which the current flows. The current flows from the collector to the emitter, and is controlled by the current flowing through the base terminal. A small current at the base terminal causes a larger current to flow from the collector to the emitter. This is known as current amplification or active region. In this configuration, the transistor acts like an amplifier, increasing the signal strength.

The 2SD1785 transistor has a wide field of applications in circuits. It can be used as a switch, amplifier, oscillator, regulator, detector, and more. For example, it can be used as a switch in a touch screen application where the signal level needs to be significantly increased. In terms of amplification, it can be used in audio amplifiers, preamplifiers, voltage regulators, and other signal processing applications. It can also be used in many other applications such as signal detector circuits, motor control circuits, communication circuits, and more.

The principle of operation for the 2SD1785 is the same as that of any other bipolar transistor. It is based on the fact that when a small current is passed through the base terminal of the transistor, it allows a larger current to pass through from the collector to the emitter. This causes amplification of the signal, which can then be used in various applications. It is important to note that the transistor must be operated within its safe power dissipation range to avoid its breakdown or failure.

In conclusion, the 2SD1785 is a high-performance NPN single bipolar transistor featuring a wide range of uses. It is used in numerous applications requiring amplification and signal detection. The current flowing through its base terminal allows a larger current to flow from the collector to the emitter, resulting in current amplification or active region. Moreover, its power dissipation range must be maintained in order to keep it functioning properly. This transistor is an excellent choice for a variety of applications owing to its high frequency characteristics, power rating, and general robustness.

The specific data is subject to PDF, and the above content is for reference