AD9835BRUZ-REEL7 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Direct Digital Synthesis (DDS) is a digital frequency generation technique commonly used for generating waveforms such as Sine, Square, Triangle and other arbitrary waveforms. It is a crucial element in applications such as Radar, telecom, sonar and data conversion. AD9835BRUZ-REEL7 is a high quality, low cost and low power DDS device which can generate accurate waveforms precisely with minimal hassle.

The AD9835BRUZ-REEL7 system is a Dual-Channel Direct Digital Synthesizer which contains an on-board 75 MHz clock and a built-in 10 MHz Crystal Reference Frequency. It is capable of providing a maximum clock frequency of 100 MHz with an effective output frequency of up to 10 MHz. It has a Voltage Controlled Oscillator (VCO) clock output which can generate output signals from 0.1 Hz to 10 MHz in both linear and logarithmic mode, depending on the given input voltage. The output signals can be digitally tuned using the integrated control register which is programmed through the SPI interface.

The AD9835BRUZ-REEL7 is an ideal choice for applications requiring a precise, low-cost and low-power digital frequency synthesizer. It can generate multiple waveforms at a time, allowing the user to simultaneously generate Sine and Square waves with adjustable frequency and phase. It also has a fast settling and tracking feature, which can be utilized for applications where frequent frequency changes are required.

The AD9835BRUZ-REEL7 system has many applications in various fields, such as radio frequency (RF) receiver and transmitter, medical, television and satellite communication, market research and surveillance. It can generate signals for spread spectrum communication, receiver and transmitter calibration, and modulation and demodulation. The device is capable of generating RF and microwave frequencies which can be used for radar and sonar, navigation and navigation aids as well as motion detection and tracking. The device can also be used as a frequency synthesizers to generate a wide range of frequencies in industrial automation applications like sensor networks, robotics, and automated test equipment.

The working principle of the AD9835BRUZ-REEL7 is quite straightforward. It utilizes a phase accumulator and a digital-to-analog converter (DAC) to generate output signals of adjustable frequency and phase. The phase accumulator continuously stores the phase information which is then used by the DAC to generate the output waveform. The phase increment value is set by the user using the control register. The frequency and phase of the output signal can be changed by adjusting the value stored in the phase accumulator using the SPI interface. The output waveform is generated by the DAC, which converts the digital value from the phase accumulator into an analog voltage.

AD9835BRUZ-REEL7 is an ideal solution for applications that require an efficient, precise, low-power and low-cost DDS device. It can easily generate precise waveforms with adjustable frequency and phase, making it a crucial element for many applications, such as Radar, telecom, sonar and data conversion. The device is widely used in various fields, such as radio frequency (RF) receiver and transmitter, medical, television and satellite communication, market research and surveillance.

The specific data is subject to PDF, and the above content is for reference