AT45DB161B-CNC-2.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT45DB161B-CNC-2.5 belongs to the category of memories. An integral part of all computers, memories can be divided into two broad categories: RAM, or Random Access Memory, and non-volatile memories, such as Flash memories. The AT45DB161B-CNC-2.5 belongs to the latter category. Specifically, it is a serial non-volatile Flash memory.

Flash memories have many advantages, such as low power consumption, fast access, and high write speeds. Flash memories are used in many devices, from cell phones, GPS systems, cameras, computers, and internet routers, as well as in embedded systems. In addition, flash memory also is used for data logging in industry for data transfer and digital signal processing.

Flash memory is based on a technology known as EEPROM, or Electrically Erasable Read-Only Memory. The AT45DB161B-CNC-2.5 and all other EEPROMs can be written and erased, but they are still non-volatile. That is, they will retain their information even after being powered down.

At the most basic level, a memory chip consists of many transistors and diodes arranged in a specific way. EEPROMs, however, use a different technology known as Floating-Gate Transistors. These transistors are made up of two gates - a control gate and a floating gate. When a voltage is applied to the control gate, electrons travel through the floating gate, which is connected to a capacitor. This causes a charge to build up on the floating gate. This charge is responsible for storing the information.

The AT45DB161B-CNC-2.5 is a 5V Flash memory chip with a very low power consumption. It is made using a 0.18-micron process and has a capacity of 16 Megabits. Its maximum write speed is 40 Mbps, which is quite fast compared to other memory chips. In addition, it is ideal for applications such as digital cameras and audio players.

In operation, the AT45DB161B-CNC-2.5 uses a logical bus for communication with external systems. The bus is managed by a device driver, which handles data transfers, address mapping, and other functions. In order to access and write to the chip, the data is first sent through the driver. Then, an address is specified, and the data is written to a specific memory location.

Finally, a chip select signal is used to enable the memory to recognize the command from the external system. Once this is done, the chip will then perform the requested operation and send the data back to the system. This process is repeated in order to read and write data to the AT45DB161B-CNC-2.5.

The AT45DB161B-CNC-2.5 can be used in a wide range of applications, from consumer devices to industrial systems. With its low power consumption, high speed write operations, and low price, the AT45DB161B-CNC-2.5 is an ideal choice for any memory application.

The specific data is subject to PDF, and the above content is for reference