BC847A,235

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BC847A,235 is a small signal NPN bipolar junction transistor (BJT) which belongs to the Single group. It is often used for low power amplifying and switching applications. Due to its low current capacity, it is typically used for relatively low power applications such as drive current for low power motors, audio amplification, and sensing applications.

The BC847A,235 is a very common BJT. It is used in a wide range of applications due to its low cost and low power requirements. Because the BJT is only rated for a maximum current of 0.2A and a maximum power dissipation of 500mW, it is more suitable for use in low power applications such as circuit amplifiers.

The BC847A,235 has three terminals: the base, emitter, and collector. The base is typically connected to a switching voltage source to control the current flow. The emitter is connected to ground and the collector is connected to the load. When a voltage is applied across the base and emitter, it causes a flow of electrons from the base to the emitter. This creates a current that passes through the collector, which then passes through the load.

The actual working principle of the BC847A,235 can be best described with the help of the following simple illustration. In the illustration, the base-emitter junction of the BC847A,235 BJT is in its off-state. This means that no current is flowing through the base-emitter junction. However, when a voltage is applied to the base-emitter junction, it causes a small current flow from the base to the emitter. This current is known as the “Gate Current” and is typically in the range of uA.

The current that is flowing across the base-emitter junction will cause a larger current to flow through the collector-emitter junction. This is because the base-emitter junction effectively “opens up” the collector-emitter junction, allowing more current to flow through it. The ratio of the collector current to the base-emitter current is known as the “Gain” of the transistor.

The BC847A,235 is ideal for use in low power applications in which the signal does not require a high level of amplification. Because of its small size and low power requirements, it is often used in laptop computers, cell phones, MP3 players, and other portable electronics.

In conclusion, the BC847A,235 is a very versatile transistor which can be used in a wide range of low power applications. Its low power and size requirements make it well-suited to the types of electronic devices commonly used in today’s technology.

The specific data is subject to PDF, and the above content is for reference