BC847CW/DG/B2,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BC847CW/DG/B2,115 is a type of Bipolar (BJT) Single Transistor. It is a NPN Epitaxial Silicon Transistor intended for use in medium power analog switching and general purpose applications.

The operating voltage of BC847CW/DG/B2,115 is 50V, the Collector current is 100mA, and the Collector-Emitter voltage is 45V. In addition, its current gain is 110-330. This indicates that it is a medium power transistor.

BC847CW/DG/B2,115 can typically be used in applications such as general purpose switching, linear and digital/analog amplification and Pulsewidth modulation (PWM). It can be used as a switch or amplifier depending on the application.

The working principle of BC847CW/DG/B2,115 relies on the fact that current can flow between emitter and collector terminals when the base terminal is fleshed with voltage. When no voltage is applied to the base terminal, the collector and emitter terminals are functionally disconnected. This allows the transistor to act as a switch, where the current through the collector is either fully on, or off, depending on the voltage level applied to the base.

When an input signal is applied to the base, the current flow between the base and collector terminals is increased. This current is amplified by the collector current, thus amplifying the input signal. With the input signal, continuous operating points can be set with the transistor acting as an amplifier.

Various linear and digital/analog amplification and Pulsewidth modulation (PWM) applications use this principle to amplify and/or switch signals. In addition, BC847CW/DG/B2,115 can also be used for amplifying small signals up to 1V in audio amplifiers, for increasing the amplitude of signals in analog to digital converters and for switching signals in drivers and logic level circuit.

BC847CW/DG/B2,115 offers many other possibilities like, power amplifiers and power amps. They can be used as power switches or drivers, as they are efficient in switching high currents with very small input signal.

BC847CW/DG/B2,115 is a multi-purpose transistor, especially suitable for amplification, switching and general purpose applications. With its operation voltage of 50V and a total Collector current of 100mA, it is capable of both amplifying and switching small and medium power signals.

The specific data is subject to PDF, and the above content is for reference