BC847CE6327HTSA1 Discrete Semiconductor Products

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Last Time Buy
Transistor Type:	NPN
Current - Collector (Ic) (Max):	100mA
Voltage - Collector Emitter Breakdown (Max):	45V
Vce Saturation (Max) @ Ib, Ic:	600mV @ 5mA, 100mA
Current - Collector Cutoff (Max):	15nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	420 @ 2mA, 5V
Power - Max:	330mW
Frequency - Transition:	250MHz
Operating Temperature:	150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-236-3, SC-59, SOT-23-3
Supplier Device Package:	SOT-23-3
Base Part Number:	BC847

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BC847CE6327HTSA1 is a type of transistor commonly referred to as a bipolar junction transistor or BJT. Transistors are classified by the amount of regions present in the device and its electrical functioning such as NPN (Negative-Positive-Negative) and PNP (Positive-Negative-Positive). Within the single transistor classification, transistors are further divided into small signal transistors, power transistors and digital transistors. BC847CE6327HTSA1 falls into the single transistor category and is classified as a small-signal transistor. The BC847CE6327HTSA1 is an NPN transistor primarily used in various electronic devices. It typically operates with a collector-base voltage of up to 40V and collector-emitter voltage of up to 65V, and can handle up to 200mA of maximum collector current. Additionally, it has a DC current gain between 80 and 300. This BJT can be used as a switch as well as an amplifier, depending on the application it is being used for. The working principle of transistors can be summed up using three distinct layers. The base layer is the control section of the transistor that has current going through it and it is forward biased. The collector layer is the output layer and is connected to the collector voltage. The emitter layer is the input layer that is connected to the emitter voltage and provides current to the transistor. When current flows through the base layer, it controls the current flow between the collector and emitter layer. More current flowing through the base layer results in more current flowing between the collector and emitter and vice versa. This is because transistors act as an amplifier or switch, depending on the bias voltage. When the base voltage is negative, there will be no current flowing between the collector and the emitter, and the transistor is functioning as an open circuit. This is known as the cutoff state and it is used when turning devices off. When the base voltage is positive, the current between the collector and emitter will start to flow, and the transistor is functioning as a closed circuit. This is known as the saturation state and is used when turning devices on.The BC847CE6327HTSA1 uses small signal transistors to amplify small signals within small electrical components. It is used for switching and amplifying signals within an electrical circuit, such as mobile phones and computers. Additionally, it is often used in low-end radio receivers for the purpose of amplification. The BC847CE6327HTSA1 is widely used in many industries, from consumer electronics to medical equipment. It is found in a wide range of electronic products such as: computers, smartphones, medical devices, workstations, and gaming consoles. In summary, the BC847CE6327HTSA1 is a type of single bipolar junction transistor (BJT), classified as a small-signal transistor. It operates with a collector-base voltage of up to 40V and collector-emitter voltage of up to 65V and can handle up to 200mA of maximum collector current. It is primarily used as a switch and an amplifier in various electronic devices, with a wide range of applications in consumer electronics, medical devices, and gaming consoles.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description