BTS117E3044ANTMA1

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	BTS117
Supplier Device Package:	PG-TO220-3-5
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Operating Temperature:	-40°C ~ 150°C (TJ)
Fault Protection:	Current Limiting (Fixed), Over Temperature, Over Voltage
Features:	--
Input Type:	Non-Inverting
Rds On (Typ):	80 mOhm
Current - Output (Max):	3.5A
Series:	HITFET®
Voltage - Load:	60V (Max)
Interface:	On/Off
Output Type:	N-Channel
Output Configuration:	Low Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of BTS117E3044ANTMA1

BTS117E3044ANTMA1 is a power management integrated circuit (PMIC) developed by Germany\'s Infineon Technologies. It is classified as a power distribution switch, load drivers and a transistor switch. This PMIC device is particularly designed for smartphone applications, as it can reduce energy consumption as compared to traditional PMIC applications. It works by providing a wide range of voltage and current levels that can be used to operate various devices within a mobile platform.

Application Field of BTS117E3044ANTMA1

BTS117E3044ANTMA1 can be used in consumer electronics, such as smartphones, tablets, and smartwatches, and industrial applications. In consumer electronics, this PMIC device can be used to power and switch certain components in a mobile device, such as Bluetooth, GPS, sensors, and displays.In industrial applications, BTS117E3044ANTMA1 is used as a switch for controlling multiple voltage rails and as a load driver for driving multiple actuators or motors. It is used in industrIal robots, automation systems, sensors, and test equipment. It can be used to power and switch between different components in industrial environments, such as power supplies, solenoids, servo motors, valves, relays, and pumps.

Working Principle of BTS117E3044ANTMA1

The BTS117E3044ANTMA1 is based on a high-efficiency switch and load driver design. It uses low-power transistors for switching and a current feedback mechanism for controlling the drive current of the connected devices.The PMIC works by connecting the input voltage VIN to the voltage rails VCR1, VCR2, VCR3, and VDR. The power is then distributed to the connected devices according to their needs. The load driver switches on and off according to the voltage and current requirements of the connected components. The power is then switched off and on by the load driver according to the current feedback from the connected components.The PMIC also includes protection features, such as over-voltage protection, over-current protection, thermal protection, and reverse polarity protection.

Conclusion

The BTS117E3044ANTMA1 is a power management integrated circuit that is classified as a power distribution switch, load drivers and a transistor switch. It can be used in consumer electronics and industrial applications, such as smartphones, tablets, and smartwatches, automation systems and industrial robots. The PMIC works by connecting the input voltage VIN to the voltage rails and then distributing power to the connected components accordingly. It also provides protection features, such as over-voltage protection, over-current protection, thermal protection and reverse polarity protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description