CMPD5001S BK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Arrays are components engineered and designed to convert alternating current into direct current. The CMPD5001S BK is the most commonly used reverse conductive, high surge current avalanche diode. It is primarily used in bridge configurations for rectification, voltage multiplier, and clamp circuits and for energy storage components in switching regulator, converter and inverter applications.

The diode is constructed from a combination of Schottky and normal diodes, mounted on a probe card. It is designed to maintain a reverse current at a minimum level of approximately 3mA. The peak current per device is about 15A, with a surge current rating of 25A.

The maximum forward current rating is 2.5A, and the junction temperature range is 0°C to 75°C. It has a minimum operating voltage rating of 30V and a maximum operating voltage of 500V. The diode features low leakage current, high efficiency, and a high degree of isolation between the two terminals. An external heat sink is required in order to maximize the diode’s heat dissipation in high current applications.

Working Principle:

The CMPD5001S BK operates by allowing current to pass through its p-type material when the voltage at its electrodes is greater than that of the junction\'s forward bias voltage. When the voltage across the junction is negative, the diode will be in a reverse-biased condition and current cannot pass through. When the voltage across the junction reaches a value known as the "knee voltage," the diode can no longer remain in a reverse bias condition and will begin to conduct current.

The diode\'s reverse breakdown capability is dependent on many factors such as its doping density, junction temperature, reverse leakage current, and its series resistance. All of these properties can affect the breakdown voltage, as well as the current that can be handled by the diode before a permanent breakdown occurs.

The diode is used in a wide variety of applications, from regulating voltage and current in various electronic devices to providing a bridge between two power sources in order to provide a more efficient path for current flow. In some applications, the diode may also be used to prevent the reverse flow of current from a battery or other power source. The CMPD5001S BK can also be used in a multiple diode array configuration that allows for complete control and regulation of current.

The CMPD5001S BK is a versatile device, with a wide range of applications in both consumer and industrial electronics. Its small size and low power consumption makes it ideal for most portable devices, while its high reliability and fast switching times make it suitable for use in industrial equipment.

The CMPD5001S BK is easy to operate and maintains a high level of performance over its entire operating voltage range. Its simple setup and low maintenance requirements make it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference