CY15B016J-SXE

Series:	Automotive, AEC-Q100, F-RAM™
Packaging:	Tube
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	FRAM
Technology:	FRAM (Ferroelectric RAM)
Memory Size:	16Kb (2K x 8)
Clock Frequency:	1MHz
Write Cycle Time - Word, Page:	--
Memory Interface:	I²C
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CY15B016J-SXE Application Field and Working Principle

Introduction

CY15B016J-SXE is an FPGA memory module from Cypress Semiconductor. The module is designed with a 7-series FPGA device that provides up to 14.3 Mbits of on-board SRAM. The module\'s standard form factor and PCIe interface makes it an ideal solution for applications such as memory expansion, high-throughput buffering, and data storage. This article provides an overview of the module\'s application field and its working principle.

Applications of CY15B016J-SXE

CY15B016J-SXE is an ideal memory solution for high-throughput buffering. The module is equipped with 7-series FPGA device which provides up to 14.3 Mbits of onboard SRAM. This SRAM can be used to provide a uniform access to data stored in multiple locations. This means that the module can be used for buffering in applications like image and video processing, telecommunications, or data centers. The module\'s form factor and PCIe interface makes it an ideal solution for applications that require high-speed and low-latency Memory Accesses. The module is designed for use in high bandwidth and low latency applications such as networked storage, network security, and industrial communications.

Working Principle of CY15B016J-SXE

CY15B016J-SXE is an FPGA memory module that utilizes a 7-series FPGA device. The FPGA provides up to 14.3 Mbits of on-board SRAM, which can be used for buffering data. The data stored in the SRAM are accessible using a PCIe interface. This means that the module can be connected to other PCIe devices for fast data transfer. The module is equipped with multiple clocks that can be used to adjust the timing of data transfer. The module also has an internal bus switch which can be used to route data from one device to another. The switch has two main components: the buffering and routing logic. The buffering logic is responsible for storing data while the routing logic is responsible for sending data to the appropriate destination. The module also has an on-board power supply which is used to provide the power needed to run the FPGA. The module can also be powered by an external power source if needed. Finally, the module is equipped with an internal reset system which can be used to reset the FPGA once it has been programmed. This allows the module to be used in applications that require a high degree of flexibility.

Conclusion

CY15B016J-SXE is an FPGA memory module from Cypress Semiconductor. It is designed for use in applications that require high throughput for buffering, low latency for Memory Accesses, and a flexible reset system. The module is equipped with 7-series FPGA device which provides up to 14.3 Mbits of onboard SRAM, as well as an internal bus switch, an on-board power supply, and multiple clocks. The module\'s PCIe interface makes it an ideal solution for networked storage, network security, and industrial communications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description