DDTA113TCA-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DDTA113TCA-7 is a single, pre-biased, bipolar junction transistor (BJT) used in various application fields, such as amplifiers, radio frequency (RF) amplifiers, transmitters, and receivers. It is designed to be used as a building block in more complex integrated circuits, such as power management integrated circuits, automotive systems, and so on. The device requires a minimum input current of about 0.3 milliampere (mA) and is characterized by a collector-base breakdown voltage of about 4.2 volts. It is rated for a maximum collector current of 10 milliamperes (mA). In addition, it is rated for a maximum power dissipation of 100 milliwatts (mW).

The DDTA113TCA-7 is a three-terminal device, comprising a base, collector, and emitter electrode. A control electrode, referred to as a gate, is used to control the device’s current conduction. The device operates by biasing the base relative to the emitter at a specific current and voltage level. This biasing results in the device being operated in a specific “active region” of the current-voltage relationship. As a result, the device can be configured to act as an amplifier, a current source, or a field effect transistor, depending on the biasing configuration.

As an amplifier, the DDTA113TCA-7 is used to amplify an input signal, current, or voltage. In this configuration, the device acts as a current source, and the collector voltage is proportional to the input. An increase in the input will result in an increase in the collector voltage. This configuration is used in radio-frequency (RF) amplifiers, receivers, and transmitters. It is also used in audio amplifiers, such as those found in portable radios, CD players, and other audio applications.

The DDTA113TCA-7 can also be used as a current source. In this application, the current through the device is held constant, regardless of the collector voltage. This configuration is commonly used in power management circuits, such as voltage regulators. The collector voltage is used to adjust the current through the device. The device can be adjusted to regulate the current with a high degree of accuracy, resulting in a stable output voltage.

The DDTA113TCA-7 can also be configured to act as a field effect transistor (FET). In this configuration, the current conduction is controlled by a control electrode, or the gate of the device. This configuration is commonly used in logic circuits, such as those found in computers and consumer electronics. By applying a voltage to the gate, the current through the device can be controlled. This configuration is commonly used to enable switching between logic states.

Overall, the DDTA113TCA-7 is a three-terminal device capable of serving as a current source, amplifier, or field effect transistor. It is used in a variety of applications, including radio frequency (RF), audio, power management, and logic circuits. With its wide range of capabilities, the DDTA113TCA-7 is a highly versatile device and is well suited for many applications.

The specific data is subject to PDF, and the above content is for reference