DRA3P48A22

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DRA3P48A22 is a solid state relay (SSR) designed to offer high insulation resistance and high current capacity performances. This type of SSR is used in applications where relatively high power AC or DC loads need to be controlled. Examples of such applications include general-purpose pump and valve control, process heating and motor control.

SSRs operate by quickly switching power to the load using low-level switching signals from a controller or a switch. These signals actuate a switching device, such as a triac, transistor, or optically coupled, to close and complete the circuit.

The DRA3P48A22 is a three-phase SSR and is capable of operating in either AC or DC circuits up to 48A continuous current. It can handle up to 660 volts AC/DC to switch heavier loads such as those created by large pumps, fans, compressors, industrial motor starters, and circuit breakers. It features an IP20-rated enclosure, providing safety and protection from dust and solid objects.

This type of SSR offers several advantages over electrical contact relays. The main benefit of using an SSR over an electrical contact relay is its durability. Because the DRA3P48A22 uses solid-state components like a triac or transistor, it can withstand a much higher number of operations and overvoltage conditions. Furthermore, since there is no physical contact, these types of relays do not suffer from arcing or high contact resistance caused by contact bouncing or wear and tear.

The DRA3P48A22 provides a fast switching frequency of up to 500 Hz, and a wide operating temperature range from -20°C to +90°C. It is also suitable for use in an AC or DC motor drive, and it features signalling contacts with a normally open/normally closed function.

Using the DRA3P48A22 is a relatively simple task. The power source to activate the load is connected to the power terminals, while the control input is connected to the ground terminal and the control signal is connected to the control terminal. When power is applied to the power terminals and the control signal is activated, the triac inside the SSR changes its position and sends the power through to the load. As soon as the control signal is removed, the triac moves back to its original position and disconnects the power to the load.

The DRA3P48A22 offers a number of practical advantages over contact relays. Its solid-state switching mechanism offers fast switching speed, high insulation resistance and extremely long life. It can handle large amounts of power, up to 660 V AC/DC, over temperatures between -20°C and +90°C. It is also simple to install and use, and has signalling contacts which make it suitable for motor drive control. In short, the DRA3P48A22 is an ideal solution for applications which require the control of larger power AC/DC loads.

The specific data is subject to PDF, and the above content is for reference