EGP10GHE3/73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EGP10GHE3/73 is a type of rectifier diode, which is a two-terminal electrical component typically used in power supplies and as an alternator diode. The diode is also referred to as a rectifier, or diode bridge, because it allows for only one-way current flow through the diode. The diode is usually used in systems and applications where it is important to ensure that the current only flows in one direction.

The EGP10GHE3/73 rectifier diode is designed to provide low power dissipation and low reverse leakage. It is designed for use in alternating current (AC) circuits, where a current reversal may occur. The diode effectively clamps the negative voltage of a circuit to the negative side of the diode and conducts electricity in only one direction.

The working principle of a rectifier diode is simple. When the diode is connected to an alternating current source, it produces an output of direct current (DC). As the current alternates between positive and negative peaks, the diode will switch between active and inactive states. When the voltage from the alternating current is positive, the diode’s electrodes are attracted to the positive peak, allowing current to flow through the diode. When the voltage from the alternating current is negative, the diode’s electrodes are repelled from the negative peak, blocking current from flowing.

Rectifier diodes can be used in applications such as power supplies, rectifiers and voltage suppressors, amplifiers, high-voltage transformers and more. They are particularly useful in converting AC power to DC power, ensuring that only DC power is available in an output circuit. The EGP10GHE3/73 can be used in applications where low power dissipation and low reverse leakage is required.

The EGP10GHE3/73 can be found in a variety of packages, depending on the application requirements. The most common packages are the TO-220 and the SMA, though other packages are also available for additional and specific uses. The TO-220 is the most common and features a three-pin design, with two pins for the anode and cathode, and a third for connecting to the heatsink. The SMA package is also a three-pin design, but features a much smaller package size.

The EGP10GHE3/73 is a single-phase rectifier diode designed for use in power supplies and as an alternator diode. It offers low power dissipation and low reverse leakage, enabling use in applications where DC power is required. The diode can be found in a variety of packages, depending on the application requirements, and is available in both TO-220 and SMA packages. Regardless of the application, the EGP10GHE3/73 diode offers reliable switching capabilities and is a reliable choice for DC power conversion.

The specific data is subject to PDF, and the above content is for reference