ES1J

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.7V @ 1A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	35ns
Current - Reverse Leakage @ Vr:	5µA @ 600V
Capacitance @ Vr, F:	8pF @ 0V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-214AC, SMA
Supplier Device Package:	SMA (DO-214AC)
Operating Temperature - Junction:	150°C (Max)
Base Part Number:	ES1J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A diode is a two-terminal electronic component that may act as a switch for current flow. It is used to allow relatively high current flows in one direction but block any flow in the opposite direction. Additionally, diodes can be used to generate power, recover energy, and convert AC to DC voltages. Single, or uni-directional, diodes, such as the ES1J, are the most common type of diode.

ES1J

The ES1J diode is a small two-terminal, surface-mounted device suitable for a variety of applications. It features high-temperature stability, low power dissipation, and a low forward voltage drop, making it well-suited for high-density surface-mount circuit designs.The ES1J can be used for a variety of applications, such as switching applications, rectifier applications, and protection circuits.

Switching Applications

The ES1J diode can be used for switching applications in which it is necessary to control current flow in one direction, while blocking negative or reverse currents. By connecting the ES1J between the supply and load, the current is allowed to flow from the supply to the load, but not from the load to the supply.

Rectifier Applications

The ES1J diode can also be used in rectifier applications, where it is necessary to convert AC voltage to DC voltage. By connecting the ES1J between an AC power supply and a load, the AC power can be rectified, allowing useful DC power to be received by the load.

Protection Circuits

ES1J diodes can be used in protection circuits to protect sensitive electronic components from damaging effects of over-voltage, reverse voltage, and over-current conditions. By connecting an ES1J in series with a load, the diode is able to limit current flow and voltage that is too high.

Working Principle

The ES1J diode is a unidirectional device, meaning it only allows current to flow in one direction. The ES1J works by allowing electrons to flow from the anode (negative terminal) to the cathode (positive terminal) when the voltage between the anode and cathode is greater than the forward voltage drop of the diode. When the voltage is less than the forward voltage drop, the diode is in the reverse-biased state and no current is allowed to flow.

Conclusion

The ES1J diode is a small, surface-mounted device that is well-suited for a variety of applications, including switching applications, rectifier applications, and protection circuits. It is a unidirectional device and works by allowing electrons to flow from the anode to the cathode when a sufficient voltage is applied.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description