ES1JL M2G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.7V @ 1A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	35ns
Current - Reverse Leakage @ Vr:	5µA @ 600V
Capacitance @ Vr, F:	8pF @ 1V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-219AB
Supplier Device Package:	Sub SMA
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to ES1JL M2G Single Rectifiers

Single rectifiers are a variety of rectifiers that are used to convert alternating current (AC) to direct current (DC). ES1JL M2G rectifiers, or ESM2Gs, are a special type of single rectifiers designed to provide a very low electrical resistance when conducting, and a high electrical resistance when not conducting.

Application Field of ES1JL M2G Single Rectifiers

ES1JL M2G rectifiers are used in a variety of applications, ranging from communications to cables, automotive and consumer electronics. They are frequently used in photovoltaic and wind power applications, where they serve to convert AC to DC power. They can be used to regulate the voltage output of a power supply, or to limit the current supplied to a device, providing over-current protection.The low electrical resistance of ESM2Gs makes them an excellent choice for applications that require fast switching or high-frequency circuits. They can be used for audio amplifier power supplies and for computer bus lines. Additionally, the high resistance of these rectifiers makes them suitable for use in noise mitigation circuits, such as power supplies that output high-frequency signals from radiating devices or electronic equipment.

Working Principle of ES1JL M2G Single Rectifiers

The working principle of ESM2Gs is based on the fact that the active layer of the rectifier has a lower conductivity than the copper wiring of the circuit board. As a result, when an AC voltage is applied to the input terminals of the rectifier, it passes through the active layer and divides itself among the positive and negative rectifying materials. The positive rectifying material will conduct current in one direction, while the negative material will conduct in the opposite direction.The voltage across the two terminals of the rectifier is known as the "drop" voltage-it will be the same regardless of the amount of current that is supplied by the rectifier. When the load current is small, the voltage drop is also small, providing for a good power savings. However, when the maximum load current is reached, the drop voltage will be at its highest, limiting the voltage that can be supplied by the rectifier.

Conclusion

ES1JL M2G rectifiers provide a high level of reliability and performance for a variety of applications, from communications to consumer electronics. Their low resistance when conducting and high resistance when not conducting makes them an ideal choice for applications that require fast switching and high-frequency circuits. Furthermore, the uniform voltage drop makes them an efficient choice, providing good power savings when the load current is low. As a result, ESM2Gs are a popular choice for a variety of applications that require reliable rectification.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description