Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Frequency:	1MHz ~ 8GHz
RF Type:	WiMAX / WiBro
Input Range:	--
Accuracy:	±1dB
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Supply:	113mA
Package / Case:	24-VFQFN Exposed Pad
Supplier Device Package:	24-QFN (4x4)
Base Part Number:	HMC602

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Detectors-HMC602LP4ETR Application Field and Working Principle

The HMC602LP4ETR RF detector from the Hittite Microwave Corporation is a high-performance wideband single-channel photodiode receiver module that is widely used in many microwave communications systems. The device provides a wide input dynamic range and low noise figure, making it ideal for applications such as Ultra Wideband (UWB) and Wideband Code Division Multiple Access (WCDMA).The HMC602LP4ETR is available in several different forms: the receiver module, the RF detector, and the receiver/detector receiver. The receiver module consists of a low-noise amplifier, RF diplexer, and integrated IF amplifier. The RF detector is a single-stage diode detector with a very wide operating range across frequencies from 100 MHz to 6 GHz. The receiver/detector receiver combines the receiver module with the RF detector.The working principle of the HMC602LP4ETR is simple and straightforward. The device consists of a low-noise amplifier, a diplexer, and an IF amplifier. The low-noise amplifier amplifies the input signal and routes it to the diplexer. The diplexer separates the signal into two separate paths depending on its frequency. The lower frequency components are routed to the integrated IF amplifier, while the higher frequency components are routed to the RF detector. At the RF detector, the signal is rectified and detected by a single-stage diode detector. The detected signal is then amplified and filtered before it is applied to the IF amplifier, resulting in a signal that is ready to be processed for further analysis. The performance of the HMC602LP4ETR is enhanced by the use of a wide dynamic range and low noise figure.The HMC602LP4ETR is most commonly used in applications involving UWB or WCDMA. In UWB systems, the device provides a wide input dynamic range and low noise figure, enabling it to detect low-power signals in crowded wireless environments. In WCDMA systems, the wideband detector allows for precise and accurate signal demodulation, resulting in a high-quality output signal. Moreover, the HMC602LP4ETR can be used in other systems such as point-to-point radio links, 802.11 networks, and indoor personal area networks. In addition to its exceptional performance, the HMC602LP4ETR is also easy to use and configure. It comes in a compact form factor that is suitable for integrating into a variety of systems. Furthermore, the device is highly reliable and its sensitivity can be adjusted for different scenarios. As a result, the device is very popular among manufacturers of wireless systems.To summarize, the HMC602LP4ETR from Hittite Microwave Corporation is a high-performance wideband single-channel photodiode receiver module that is widely used in many microwave communications systems. The device provides a wide input dynamic range and low noise figure, making it ideal for applications such as UWB or WCDMA. Moreover, the device is very easy to use and reliable, making it the preferred choice for many manufacturers of wireless systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description