HMC801LP3ETR RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electrical components that reduce the strength of an electrical signal. HMC801LP3ETR is a type of attenuator that provides a highly linear and accurate signal attenuation solution for use in a wide variety of industrial and consumer / commercial applications

As a 3-bit voltage controlled attenuator, HMC801LP3ETR contains three attenuation lines which are linearly controlled by an SPI control interface. The programmable attenuator gain range is from 0 to 31 dB with 0.5 dB steps. It has 35 dB end of life attenuation accuracy and third order intercept point of -45dBm, typically. HMC801LP3ETR is manufactured using GaAs pHEMT MMIC technology, making it an economical and efficient solution in its application field.

In operation, the attenuator is supplied by an external voltage source and the desired attenuation is programmed by a control input. The attenuator works by selectively connecting or disconnecting resistors in series or parallel combinations to provide linear attenuation. It is also designed to operate within a certain temperature range and power dissipation range, in order to prevent power and temperature-induced nonlinearities.

Application Fields

HMC801LP3ETR can be used in a variety of consumer, commercial and industrial applications. Its linearity, accuracy, and versatility make it suitable for a range of applications, including military, communication system, and medical.

In telecommunication systems, HMC801LP3ETR is often used to adjust the signal level in a transmission line or telecommunications network, as well as to improve the signal-to-noise ratio. It is also used in radio-frequency power amplifiers to match the output impedance of one section to the input impedance of the next and thus provide the desired gain. It is also used in distributed component applications in which multiple components must match their voltage levels by setting the amplifier gain.

HMC801LP3ETR can also be used to create gain stages in consumer electronics. For example, it can be used in a preamplifier circuit to control the amount of signal that is passed from one stage to the next. It can also be used in power amplifiers, where it can be used to set the levels of the input signal in order to balance between distortion and power dissipation. Additionally, it can be used in active filters to adjust the frequency responses and thus biasing the gain.

Working Principle

The working principle of HMC801LP3ETR is based on the concept of using resistors in series and parallel combinations on a printed circuit board (PCB) to create a linear attenuating circuit. These two types of resistors can be connected or disconnected depending on the desired attenuation level. The end result is a linear attenuation circuit with the desired performance characteristics.

First, an external voltage source is applied to the attenuator. The required attenuation level is then programmed using an SPI control interface. This voltage then passes through the resistors which are connected in series and parallel depending on the desired level of attenuation. The voltage level is therefore controlled by using the control interface to set the proper connection and disconnection of resistors.

The combination of resistors in series and parallel on the PCB also results in an impedance which is tuned to the frequency of the signal, providing the desired frequency response. This, in turn, results in the desired signal attenuation.

In summary, HMC801LP3ETR is a highly linear, accurate, and economical solution for attenuation applications in a variety of consumer, commercial, and industrial applications. It provides a linear attenuation range from 0 to 31 dB with 0.5 dB steps, and its third order intercept point is typically at -45dBm. With its highly linear and accurate signal attenuation performance, it is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference