IRGS4064DPBF

Switching Energy:	29µJ (on), 200µJ (off)
Supplier Device Package:	D2PAK
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 175°C (TJ)
Reverse Recovery Time (trr):	62ns
Test Condition:	400V, 10A, 22 Ohm, 15V
Td (on/off) @ 25°C:	27ns/79ns
Gate Charge:	32nC
Input Type:	Standard
Series:	--
Power - Max:	101W
Vce(on) (Max) @ Vge, Ic:	1.91V @ 15V, 10A
Current - Collector Pulsed (Icm):	40A
Current - Collector (Ic) (Max):	20A
Voltage - Collector Emitter Breakdown (Max):	600V
IGBT Type:	Trench
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to IRGS4064DPBF

The IRGS4064DPBF is a type of single-edge controlled, power integrated gate-bipolar transistor (IGBT). It is a component used in power electronic applications and has found a wide range of applications in motor control, welding, railway, renewable energy, aerospace, and automotive applications. The component helps in boosting the efficiency of power electronic systems and devices, which makes it highly sought-after by device manufacturers. The component is hot-swappable and has the capability to handle in both high load and ambient temperature grades. In terms of the component’s structure, the IRGS4064DPBF is made up of an insulated gate, a base and a collector. The component has its insulated gate connected to a control circuit, while the base and collector are used as the electrical output terminals. The component is mainly used in medium/high power applications and is one of the most efficient IGBT’s in the market.

Applications and Uses of IRGS4064DPBF

The IRGS4064DPBF is widely used in the power electronic systems and devices due to its wide range of features and capabilities. The component has the ability to handle high voltages, high power requirements and high temperatures, making it ideal for motor control, welding, and automotive applications. The component is well-suited for applications in the fields of renewable energy and aerospace due to its efficient and effective performance in these sectors. For motor control applications, the component is used in the drive control of AC and DC motors. This is due to its power handling capability. For welding applications, the component helps in increasing the efficiency of the welding process. Moreover, the component can operate at different speeds, without any significant power loss, which makes it suitable for automotive and railway applications. In the aerospace sector, the component finds use in high-power radar and communications systems. Finally, the component is also used in the renewable energy sector, as it can help in harnessing energy from alternative sources such as solar, wind and geothermal.

Working Principle of IRGS4064DPBF

The IRGS4064DPBF is a bipolar power transistor, where the internal operation of the component is based on an N-channel MOSFET and a PNP bipolar junction transistor. The N-channel MOSFET works as the main switch, while the PNP bipolar junction transistor provides additional shut-off of the switch. In its off state, the component acts as an open switch. This is because, in the off state, the N-channel MOSFET switch is held open, while the PNP bipolar junction transistor provides additional shut-off to the N-channel MOSFET switch. When a positive voltage is applied to the gate terminal of the component, the N-channel MOSFET switch closes. This leads to the closing of the internal switch, allowing current to flow from the collector to the base. This then results in the current being added to the electrical load connected between the base and the emitter terminals.

Conclusion

The IRGS4064DPBF is one of the most efficient and effective power integrated gate-bipolar transistors in the market, and is widely used in power electronic systems and devices, due to its wide range of features and capabilities. The component is mainly used in motor control, welding, automotive, railway, aerospace, and renewable energy applications. The component works by having an N-channel MOSFET acting as the main switch, while a PNP bipolar junction transistor provides additional shut-off. This makes the component highly efficient and effective in the mentioned applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description