KSE181STU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transistors, specifically Bipolar Junction Transistors (BJTs), are widely used in audio amplifier applications due to their high current gain and low noise characteristics. One such type of BJT is the KSE181STU, which is designed to meet a wide range of applications in audio amplifiers, preamplifiers, tone controls and active filters. The KSE181STU is a two-stage BJT with an NPN/PNP arrangement, and runs at a voltage of 5V to 15V.

The KSE181STU operates in single-ended or differential mode, offering good stability and excellent voltage gain. In single ended mode, the KSE181STU is biased using a single resistor, which sets the quiescent current of the device. In differential mode, the KSE181STU can be used in an amplifier or in an inverter circuit, where two resistors are used for biasing the device. The voltage gain of the KSE181STU can be further enhanced by using an external inductor in the amplifier in lieu of a capacitor.

The center of the KSE181STU is comprised of two small NPN transistors called Base-Emitter (BE) and Collector-Base (CB) devices. The Emitter-Base (EB) transistor functions as the amplifier, while the Collector-Base (CB) transistor serves as the input stage. The Emitter terminal of the KSE181STU is connected to the source (input), while the Collector terminal is connected to the load (output), and both can be operated in either forward or reverse bias.

The KSE181STU is also capable of high slew rate capabilities, making it suitable for high frequency applications. It has an input impedance of 2.3 KOhms and an output impedance of 200 Ohms. The device has a wide operating temperature range of -55C to +150C and a low static power consumption of 80mA.

The KSE181STU relies on two important operational principles in order to achieve optimal performance, namely, self-biasing and class-AB audio biasing. In self-biasing, the device uses a fixed current source to maintain its quiescent current, and hence its voltage output. In class-AB audio biasing, an audio signal is applied to the input terminal, and the output voltage is derived by adjusting the bias current supplied by the KSE181STU. Both types of biasing allow the device to achieve high voltage gains with minimal noise.

All in all, the KSE181STU is an amazing device which is perfectly tailored to meet the needs of audio amplifiers and other related applications. It allows for both self- and audio-biasing, and offers high voltage gain, wide operating temperatures and low power consumption. As a result, the KSE181STU is a great choice for a wide variety of audio applications.

The specific data is subject to PDF, and the above content is for reference