LAN8710A-EZC-ABC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LAN8710A-EZC-ABC is a high performance Ethernet physical layer (PHY) transceiver integrated circuit that provides the interface between physical layer and higher level network communication protocols over a copper interface. The device supports both 10BASE-T and 100BASE-TX operation and provides a low cost and low power consumption solution. It is compliant to IEEE 802.3 standards, making it suitable for high speed applications such as Remote Data Acquisition (RDA) systems, Ethernet switches, repeaters, and home gateway applications.

This device consists of an integrated 10/100 Mbps Ethernet physical layer transceiver and associated supporting circuitry. The transceiver has 3 ports: a differential transmit/receive pair and a ground/common mode that is connected to the network medium. The transmitter section of the LAN8710A-EZC-ABC is responsible for encoding and signaling data to the network medium and the receiver section is responsible for recovering data from the network medium. The integrated transceiver supports 10Base-T and 100Base-TX physical layer operation and is compliant to IEEE 802.3 standards.

The device offers multiple operating modes, allowing it to be used in a variety of applications. The normal operating mode is half duplex, where data is sent and receivedsimultaneously in two directions via the same line. The LAN8710A-EZC-ABC also supports full duplex operation in which data is sent and received on two different lines, with one line dedicated to transmitting data and the other to receiving data. The integrated transceiver is capable of operating in Normal mode, WOL (Wake on LAN) mode, and Digital loopback mode.

The LAN8710A-EZC-ABC features low power consumption and flexible power management features. The integrated power management circuit enables the device to switch to reduced power modes when idle or during periods of low data throughput. The integrated transceiver also supports power saving modes such as Wake on LAN, allowing the system to be woken up from a sleep state when a specific pattern is detected on the network medium.

In addition to its physical layer interface, the LAN8710A-EZC-ABC also integrates an integrated pulse shape filter that reduces the impact of external noise on the physical layer. The integrated filter removes high frequency noise, allowing for a reliable data transfer over the network medium. The integrated transceiver also features Automatic MDI/MDI-X detection and polarity correction logic, which simplifies network cable connection and diagnostics.

The LAN8710A-EZC-ABC is also equipped with several advanced features that allow it to be used in Home Area Networks (HANs) and home networking applications. These features include a complete set of auto-negotiation controller blocks, which enable the device to automatically adapt to different speeds and line conditions, as well as an integrated compliant 10/100 Media Access Controller (MAC) to provide a reliable interface to upper layer protocols. The device also features interrupt driven Frame Event Detection, allowing it to detect and report frame events such as frame errors, heartbeats, and link failure that can be used to optimize system latency and maximize throughput.

In summary, the LAN8710A-EZC-ABC is a high performance physical layer transceiver that provides a low cost and low power consumption solution. It is compliant to IEEE 802.3 standards and supports both 10BASE-T and 100BASE-TX operation. This device features multiple operating modes, flexible power management features, integrated pulse shape filter, Automatic MDI/MDI-X detection and polarity correction logic, and complete auto-negotiation controller blocks. It is suitable for high speed applications such as Remote Data Acquisition (RDA) systems, Ethernet switches, repeaters, and home gateway applications.

The specific data is subject to PDF, and the above content is for reference