LCE18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient voltage suppressor (TVS) diodes are gaining increasing attention in recent years due to their ability to limit voltage transients from multiple sources. They have become essential components in a variety of systems including automotive, telecommunications, information technology, and consumer electronics. The TVS diode is a three-terminal semiconductor device used to protect sensitive circuits from transient overvoltages. This device can be used in both unidirectional and bidirectional configurations. The most common type of TVS is the Controlled Avalanche Rectifier (CAR).

The working principle of a TVS diode is essentially the same as that of a semiconductor diode. When a voltage higher than its breakdown voltage is applied, the diode conducts current and its junction depletion region increases. Once the voltage reaches the breakdown voltage, the sudden increase in current causes a large increase in the depletion region width, resulting in an avalanche breakdown. This allows current to flow through the diode, thus protecting its associated circuit from damaging transients and surges.

TVS diode devices are available in a variety of packages, each designed to meet specific power and voltage requirements. The most common being the surface mount package, which is often referred to as LCE18. Typically, these packages are small in size and are designed to be easily soldered onto printed circuit boards. The advantages of using LCE18 packages include: high surge current capability, large junction capacitance, and low reverse recovery time. These features make the LCE18 package an ideal choice for high power applications, such as automotive or industrial applications.

TVS diodes are available in various voltage and power ratings. The LCE18 package typically ranges from 600 to 1500 volts with power ratings between 5 to 20 watts. The breakdown voltage of the diode depends on the specific application and needs of the system. Generally, the higher the breakdown voltage, the higher the power rating of the device.

The maximum surge current capability of an LCE18 diode is mainly determined by the package size. The larger the package size, the higher the current rating will be. The current carrying capability of TVS diodes is typically specified in units of surge current (Ipp). This value refers to the maximum current that a diode can pass without sustaining permanent damage.

In general, TVS diodes are designed to protect a circuit or system from transient overvoltages and surges. They are able to limit the current flow through their junction to an acceptable level. By limiting current flow, the diode prevents any damage to associated circuits or systems. The LCE18 package is an ideal choice for a wide range of applications, due to its small size, high surge current capability, low reverse recovery time, and large junction capacitance.

The specific data is subject to PDF, and the above content is for reference