LM9036DT-5.0/NOPB

Current - Output:	50mA
Base Part Number:	LM9036
Supplier Device Package:	TO-252-3
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Protection Features:	Over Temperature, Reverse Polarity, Short Circuit
Control Features:	--
PSRR:	60dB (120Hz)
Current - Supply (Max):	2mA
Current - Quiescent (Iq):	20µA
Series:	--
Voltage Dropout (Max):	0.40V @ 50mA
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	5V
Voltage - Input (Max):	40V
Number of Regulators:	1
Output Type:	Fixed
Output Configuration:	Positive
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The LM9036DT-5.0/NOPB is a voltage regulator, provided by Texas Instruments, which is designed to regulate the voltage output in order to maintain consistent voltage levels to a wide range of electronic devices and components. The LM9036DT-5.0/-NOPB can be used in applications such as power regulation, DC-DC converters, and other linear regulation systems.

Features

The LM9036DT-5.0/NOPB is capable of operating with a wide range of input voltages, from 2.5 volts up to 15 volts. Additionally, it can provide a regulated output voltage as low as 0.8 volts and as high as 13.2 volts. This makes the LM9036DT-5.0/NOPB suitable for regulating a variety of different electrical devices. Additionally, the device is capable of providing up to 5 amps of output current and up to 500 mA of output current at the regulated output voltage. This means it can be used to provide power to a range of different low-current devices and components.The device’s high efficiency also ensures that it generates very little heat while in operation. This makes it a suitable component for use in applications where the temperatures can easily become too high for other devices to operate in. The LM9036DT-5.0/NOPB also has low noise characteristics which prevent it from generating a high amount of electrical interference when in operation.

Application Field and Working Principle

The LM9036DT-5.0/NOPB is suitable for use in a wide range of different devices and applications. These range from DC-DC converters, to medical equipment, to computers, to radio receivers. The LM9036DT-5.0/NOPB is also capable of regulating the input voltage in order to maintain the desired output voltage. This is achieved through the use of a high-quality switched-mode regulator circuit.The LM9036DT-5.0/NOPB voltage regulator works by monitoring the input voltage, which is then compared to the preset output voltage. If the input voltage is higher than the output voltage, then the regulator will reduce the input voltage in order to match the preset output voltage. On the other hand, if the input voltage is below the preset output voltage, then the regulator will maintain the output voltage by increasing the input voltage. This regulation cycle then repeats each time the input voltage is out of range of the preset output voltage. This ensures that the output voltage remains consistent, even if the input voltage varies. This process allows devices to continue to receive the desired voltage levels.

Conclusion

In conclusion, the LM9036DT-5.0/NOPB is a powerful, efficient, and reliable voltage regulator which can be used in a wide range of different applications. Its high efficiency and low noise characteristics mean it can be used in a variety of different applications. Additionally, its capability of providing a wide range of input and output voltages, as well as its switched-mode regulation circuit make it a suitable component for regulating the voltage levels in many different electrical devices and components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description