LM9036MM-5.0

Current - Output:	50mA
Base Part Number:	LM9036
Supplier Device Package:	8-VSSOP
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Protection Features:	Over Temperature, Reverse Polarity, Short Circuit
Control Features:	--
PSRR:	60dB (120Hz)
Current - Supply (Max):	2mA
Current - Quiescent (Iq):	20µA
Series:	--
Voltage Dropout (Max):	0.40V @ 50mA
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	5V
Voltage - Input (Max):	40V
Number of Regulators:	1
Output Type:	Fixed
Output Configuration:	Positive
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to LM9036MM-5.0

The LM9036MM-5.0 is a low-power, high-efficiency linear voltage regulator designed for a wide range of applications, including automotive, consumer electronics, industrial and medical applications. This high-performance integrated circuit is specifically designed to provide regulated 5 V output voltage at up to 7 A with excellent line and load regulation performance. With these features, it is suitable for a wide range of system design requirements.

Features of the LM9036MM-5.0

The LM9036MM-5.0 linear voltage regulator offers many features for designers and users, including:

• Low Noise and Low Ripple – The LM9036MM-5.0 has a low noise frequency of 1.2 MHz and can provide a ripple of 1mV (max.)
• High Efficiency – The LM9036MM-5.0 can achieve high efficiency of up to 94%.
• High Accuracy – The LM9036MM-5.0 offers high accuracy of +/-0.5%.
• Wide Operating Temperature Range – The LM9036MM-5.0 can operate over a temperature range of -40°C to +125°C.
• Thermal Shutdown Protection – The LM9036MM-5.0 features thermal shutdown protection.

Application Fields and Working Principle of LM9036MM-5.0

The LM9036MM-5.0 linear voltage regulator can be used in a variety of applications, including automotive, consumer electronics, industrial and medical applications. In automotive applications, the LM9036MM-5.0 can be used in fuel management systems and engine control systems. In consumer electronics, it can be used in laptop computers, mobile phones and tablets. In industrial applications, the LM9036MM-5.0 can be used in industrial control systems and power management systems. In medical applications, the LM9036MM-5.0 can be used in patient monitoring systems, laboratory equipment, and other medical device applications.The working principle of the LM9036MM-5.0 is based on a linear regulator topology. The input voltage is applied across the VIN and GND pins. The output voltage is maintained by an internal voltage-regulating error amplifier, which compares the actual output voltage with a reference voltage. When the actual output voltage is lower than the desired value, the error amplifier increases the output voltage by either increasing the current through the control element or increasing the base-emitter voltage of an internal transistor. The output voltage is regulated by the error amplifier based on the difference between actual output voltage and the reference voltage.

Conclusion

The LM9036MM-5.0 is a low-power, high-efficiency linear voltage regulator designed for a wide range of applications, including automotive, consumer electronics, industrial and medical applications. It offers many features, such as low noise and ripple, high accuracy, wide operating temperature range, and thermal shutdown protection. The LM9036MM-5.0 can be used in a variety of applications, and its working principle is based on a linear regulator topology.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description