M39003/01-5518H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are electrochemical capacitors that use a tantalum powder core as an anode, along with an electrolytic solution or oxide as a cathode. They offer higher capacitance than traditional aluminum electrolytic capacitors but require a higher working voltage, making them a popular choice for applications requiring higher storage capacities than an aluminum capacitor.

The M39003/01-5518H is a tantalum capacitor that is typically used in applications where a high capacitance is required. It is categorised as a “surface mount” tantalum capacitor, meaning it is designed to be attached to a PCB and used in conjunction with other surface mount components. The M39003/01-5518H offers a capacitance of 180 uF, a voltage rating of 25V, and a tolerance of ±20%.

The working principle behind the M39003/01-5518H is similar to that of other tantalum capacitors: an electrolytic solution or oxide is used to form the cathode, and a wire or metal strip in the anode is connected to a direct current source. Current passes through the capacitor, creating an electrochemical reaction at the electrodes, which causes charges to accumulate on the metal strip. This increases the total capacitance of the capacitor up to its potential voltage rating.

The M39003/01-5518H is primarily used in audio signal processing and communications equipment installation. Its high capacitance enables it to store and release energy quickly, allowing it to act as a buffer for rapid changes in voltage. This makes it ideal for applications such as low-noise amplifiers, oscillators, and stabilized power supplies. It is also used in filters and RF circuits to block or reduce signal interference.

The M39003/01-5518H is a reliable and effective capacitor and is increasingly being used in many applications that require a high capacitance. Its advantages include its relatively low cost, high capacitance, and long-term stability. The downside is that it requires a higher working voltage and may be subject to dielectric losses from sudden surges in voltage.

The specific data is subject to PDF, and the above content is for reference