M39003/01-6349/HSD Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are widely used in a variety of applications, and the M39003/01-6349/HSD is no exception. This capacitor has a capacitance of 0.5µF at a maximum operating voltage of 25 VDC, making it ideal for low-power applications. There are two types of tantalum capacitors available: axial and radial. The M39003/01-6349/HSD is an axial type, which means that the leads are located near the bottom and top of the component, and the capacitor is designed to fit through a hole in the PCB.

The primary advantage of a tantalum capacitor is its small size and high capacitance-to-volume ratio. Tantalum capacitors are also relatively cheap and are able to withstand large temperature ranges, making them an ideal choice for high-temperature applications. Additionally, these capacitors have a very low ESR (equivalent series resistance), making them capable of handling a large amount of power without significant power loss.

The basic working principle of a tantalum capacitor is the same as other capacitors. When an electric potential is applied to the capacitor, electric charge is stored in both the anode and cathode sections of the capacitors. This stored charge creates an electrostatic field, which enables the capacitor to store energy and give off electric current when exposed to an electric field. The capacitance of a tantalum capacitor is determined by the amount and type of material used in the capacitor.

M39003/01-6349/HSD has a wide range of applications. It is often used for filtering, signal conditioning, ground triggering, and noise suppression in electronic equipment, as well as for power supply decoupling and buffering. It can also be used to reduce or eliminate the noise caused by switching power supplies in medical and telecommunications equipment, and for supplying bias current for sensors and other signal application systems. In addition, it can be used to terminate the frequency ranges in timing circuits, and to decrease the contact resistance used in impulse relays.

Overall, the M39003/01-6349/HSD is a popular choice for low-power, high-temperature applications, due to its small size, high capacitance-to-volume ratio, and low ESR. Its wide range of applications make it an invaluable component in many electronic solutions.

The specific data is subject to PDF, and the above content is for reference