M39003/01-7168

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors have been widely used in various applications. They are typically constructed by grinding a tantalum powder into a pellet and sintering it to form either a rod or a plate. The pellets are then loaded with two electrodes, typically an anode and cathode. The anode is usually constructed of conductive materials such as aluminum or indium depending on the application. These materials are then attached to the pellet using a specialized bonding technique. The most common bonding technique is known as “flying” anode which involves attaching the anode at two separate points inside the pellet.

M39003/01-7168 is an electrolytic tantalum capacitor. It is a three-terminal device with a capacitance of 22mF and a working voltage range of 6-10VDC. Its maximum leakage current is 5mA and its ESR is 0.05 ohms. This device is typically used in circuits requiring a stable DC voltage or controlled transient spikes due to its low ESR rating. It can also reduce losses during power transitions and help minimize unnecessary current flows.

The working principle of the M39003/01-7168 is based on the principle of electrochemical capacitors. These capacitors are charged and discharged in a series of cycles. When these cycles are repeated, the current flow between the two electrodes of the capacitor is controlled and a certain amount of charge is transferred between them. This charge is used to store energy in the form of electrical potential. This stored electrical energy can be used to power electronic devices.

The M39003/01-7168 is used in a variety of applications. One area where it is commonly used is in power supplies for computers and other electronic devices. The capacitor helps to maintain a stable supply voltage while reducing losses due to current flowing in undesired directions. It is also used in automotive applications where it acts as an efficient power supply for lighting systems and electronic control modules.

The M39003/01-7168 is also used in the communications industry where it is used in antennas, receivers and other radio frequency equipment. In these applications the capacitor helps to reduce noise and interference by eliminating unwanted noise that may be caused by the transmission of a signal.

Tantalum capacitors are becoming more and more popular due to their small size, high capacity, resistance to corrosion and high performance. As such, they are highly desirable for many different applications. The M39003/01-7168 is no exception and has been widely adopted for a variety of applications.

The specific data is subject to PDF, and the above content is for reference