M39003/01-8226

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are widely used in electronic applications, due to their superior characteristics of low leakage, low ESR (equivalent series resistance) and high capacitance. The M39003/01-8226 is a surface mount tantalum chip capacitor, and is used in applications such as power supply and decoupling. In this article, we will discuss the application field and working principle of the M39003/01-8226.

Application Field and Uses

The M39003/01-8226 can be used in a variety of electronic applications due to its surface mount form factor. Its size is 1.6mm x 0.8mm, making it quite small and for high density board placement. This makes it suitable for use in high-density circuits, as well as for computer motherboards and other devices with dense components. It can also be used in industrial and military applications, due to its compact size and low ESR.

The M39003/01-8226 is suitable for use in high power applications such as power supply and energy storage. Its low ESR and small size make it ideal for use in situations where there may be high amounts of current being drawn, such as in circuit boards in car batteries or computers. The low ESR of the M39003/01-8226 also helps to reduce noise in the circuit, which may cause failure or degradation of products.

The M39003/01-8226 is also suitable for use in high-frequency circuits, due to its low point-to-point inductance. This helps to lower the impedance of the device, reducing power losses and increasing the efficiency of the circuit. It can also be used in electrostatic discharge (ESD) protection circuits, as it can help to protect sensitive components from damage caused by static discharge.

Working Principle

A tantalum capacitor works by storing electrical charge between two conductive plates. When a voltage is applied across the plates, an equal and opposite charge is generated on the other plate. This process is known as “capacitive charging”. The amount of capacitance that the M39003/01-8226 is capable of storing is a measure of the amount of charge that can be stored on the plates.

The M39003/01-8226 capacitor is made from a tantalum electrolyte along with two electrodes, one made of titanium and the other made of niobium. The capacitance of the M39003/01-8226 is determined by the thickness of the oxide layer, which acts as the dielectric between the two plates. The thicker the oxide layer, the higher the capacitance.

The M39003/01-8226 capacitor has a low equivalent series resistance (ESR) due to its small size and thin oxide layer. The ESR helps to limit the amount of current that can be passed through the capacitor, thus protecting the other components in the circuit from damage caused by excessive current. The ESR also helps to reduce voltage drops across the capacitor, resulting in improved performance.

Conclusion

The M39003/01-8226 is a surface mount tantalum chip capacitor, and is suitable for use in a variety of electronic applications. Its low ESR and small size make it suitable for use in applications such as power supply, decoupling and ESD protection. The low point-to-point inductance of the M39003/01-8226 makes it suitable for high-frequency circuits. Its low ESR also helps to reduce noise in the circuit, and helps to protect sensitive components from damage caused by static discharge.

The specific data is subject to PDF, and the above content is for reference