Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors are a type of capacitor which uses tantalum metal for its anode. Unlike aluminum electrolytic capacitors, the tantalum capacitor offers extremely low leakage, excellent frequency characteristics and stability over an extremely wide temperature range. It is commonly used in high-speed switching applications and other circuits requiring low-loss operation. The M39003/03-2043 is a type of tantalum capacitor which combines these advantages with the cost savings of a surface mount package.

The M39003/03-2043 is a solid electrolytic capacitor which can be used in a variety of applications. It is typically used in high-speed switching, power supplies, decoupling, input and output filters, and noise suppression circuitry. The capacitor is available in three voltage ratings; the 5V rating can handle up to 2.5 Amps, the 10V rating can handle up to 1.25 Amps, and the 16V rating can handle up to 1 Amp of continuous current. It has a high CV/I ratio, a low equivalent series resistance (ESR), and an extended temperature range from -55°C to +125°C.

The M39003/03-2043 is a non-polarized capacitor, meaning that it does not have the negative and positive leads that are found in polarized tantalum capacitors. This allows it to be soldered in either orientation, making it ideal for surface mount applications. It is available in both an axial leaded and surface mount configuration.

The working principle of the M39003/03-2043 is the same as that of any other non-polarized tantalum capacitor. An electrolyte, usually a mixture of propylene carbonate and sulphuric acid, is used to form two concentric electrodes of tantalum metal. The positive electrode is the anode, where the electrical current flows in and charges the capacitor. A tightly rolled element of tantalum oxide, known as the dielectric layer, is sandwiched between the anode and the cathode. The electrical current travels through the dielectric layer and is stored in the electric field that is created. When the voltage is reversed, the highly ordered dielectric layer prevents the electric field from discharging, allowing the capacitor to hold its charge.

The M39003/03-2043 is a reliable, low-cost capacitor and is an excellent choice for a wide range of applications. It offers excellent performance over a wide temperature range, low ESR, and a high CV/I ratio. While it is non-polarized, which means it can be soldered in either orientation, care must be taken to ensure that it is not subject to reverse polarity during installation or operation.

The specific data is subject to PDF, and the above content is for reference