M39003/03-4041/HSD

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	D (0.001%)
Features:	Military
Manufacturer Size Code:	D
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.351" Dia x 0.786" L (8.92mm x 19.96mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	Military, MIL-PRF-39003/3, CSR23
ESR (Equivalent Series Resistance):	--
Type:	Hermetically Sealed
Voltage - Rated:	15V
Tolerance:	±10%
Capacitance:	220µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<,h3>Tantalum Capacitors<,/h3>M39003/03-4041/HSD capacitors, or Surface Mount Tantalum-Polymer Capacitors, are electronic components that are composed of tantalum powder and Polymer Electrolytic Gel. These capacitors are characterized by their bulkiness, lack of polarity, low cost, long life, and high-temperature operating capabilities, and are often used in applications that involve higher temperatures, higher power densities, and higher voltages than traditional capacitors used in consumer electronics.The M39003/03-4041/HSD capacitors are typically used in applications where very low-loss and high reliability are needed, such as laptop computers, tablets, mobile phones and other portable devices. They are especially suited for a wide range of applications, including high-performance audio, medical, automotive, and military equipment, as well as in consumer products.The M39003/03-4041/HSD capacitors are constructed with a tantalum anode, having an anodic oxide film that acts as an insulating barrier, separating the anode from the cathode. This oxide film helps to protect against short circuits. The cathode consists of Polymer Electrolytic Gel, made of a polymeric compound that serves as an insulator and dielectric for the capacitor. The anode and cathode are then connected with two solid conductors.The working principle of M39003/03-4041/HSD capacitors is based on the electric charge stored between the anode and the cathode. When a voltage is applied, a current will flow through the capacitor from the positive to the negative terminal, which causes the charge stored on the anode to become negative and on the cathode to become positive. This charge is then held between the two terminals as long as the voltage is applied. When the voltage is removed, the charge dissipates, returning to its prior state.M39003/03-4041/HSD capacitors are specifically designed to have improved performance in higher temperatures than conventional solid tantalum capacitors. They are also ideal for applications with higher frequency switching or signals, which can cause higher current spikes than conventional capacitors. As a result, they are increasingly sought after for applications in LCD TVs, computers, cellular handsets, and other smaller electronics.Overall, M39003/03-4041/HSD capacitors offer much better performance than standard tantalum capacitors due to their improved temperature and frequency response. By providing these features, the capacitors can enable higher levels of performance in a variety of applications. Additionally, their low cost and long life make them a cost-effective solution for many electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description