M39006/30-0385H

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	P (0.1%)
Features:	Military
Manufacturer Size Code:	T1
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.219" Dia x 0.515" L (5.56mm x 13.08mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	Military, MIL-PRF-39006/30, CLR90
ESR (Equivalent Series Resistance):	3.42 Ohm
Type:	Hermetically Sealed
Voltage - Rated:	75V
Tolerance:	±10%
Capacitance:	6.8µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Tantalum capacitors are a type of electrolytic capacitor that uses a tantalum metal oxide as one of its electrodes. They are widely used in the electronics industry due to their relatively low cost, small size and high capacitance. The M39006/30-0385H is a specific type of tantalum capacitor that is used in a variety of different applications and this article will explore the various applications of this component and its working principle.

M39006/30-0385H Application Field

The M39006/30-0385H is a type of tantalum capacitor primarily used in telecom, radio frequency (RF), power supply, automotive and optoelectronic applications. In telecom applications, this capacitor is used in s-parameter and video signal transmission where they are used to store and filter signals. In RF applications, these capacitors are used in microwave filters. They are also used in power supplies as part of the filtering and smoothing of rectified AC power.In automotive applications, these capacitors are used as part of the voltage regulator circuit. They are also used to filter and regulate current ripple in electronic control and fuel injection systems. In optoelectronic applications, the M39006/30-0385H is used to filter the output of LED\'s and other light-emitting components.

M39006/30-0385H Working Principle

The M39006/30-0385H is a type of non-polarized tantalum capacitor with an anode constructed from a tantalum polymer film and a cathode made of aluminum. When current is applied to the capacitor, the anode is polarized and a dielectric layer forms between the two electrodes. This dielectric layer stores electrostatic energy which is used to supply current to an electrical circuit when needed.The capacitance of the M39006/30-0385H is determined by its size and structure. The larger the capacitor and dielectric layer, the greater the capacitance. The capacitance of the capacitor is also affected by the characteristics of the material that it is made from. The M39006/30-0385H has a capacitance of 15 uF and a voltage of 35V.

Conclusion

The M39006/30-0385H is a type of tantalum capacitor that is widely used in various different applications. This capacitor has a capacitance of 15 uF and a voltage of 35V. It is mainly used in telecom, RF, power supply, automotive and optoelectronic applications. The working principle of the M39006/30-0385H is based on the polarization of the anode and the formation of a dielectric layer between the two electrodes that stores electrostatic energy for use in an electrical circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description