MBR60100PTE3/TU

Series:	*
Part Status:	Active
Base Part Number:	MBR60100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Application Field of MBR60100PTE3/TU Rectifier

MBR60100PTE3/TU is a diode rectifier component produced by NXP Semiconductors. It is part of the MBR6010, a special single-phase rectifier series in TO-264AA package, suitable for high temperature applications up to 150 °C, under harsh conditions like high operating temperature and high frequency. Typical application fields for MBR60100PTE3/TU are:

• AC/DC converters in UPS and other power supplies;
• High speed DC/DC converters;
• Motor drives;
• Electronic lighting circuits;
• Battery charging system;
• Solar cells power converters.

Working Principle

A diode rectifier is a two-terminal electrical device consisting of a N-type and a P-type semiconductor joined together to form a junction and use electrical current for rectification. It works as a valve that allows electric current to flow in only one direction, blocking current flow in the reverse direction. Therefore, it has a dual purpose: it can serve as a load switch and as a freewheeling diode in inverters and other electronic circuits.Another typical application of diode rectifiers is for power conversion. The single-phase diode rectifier works on a full-wave bridge rectification principle combining four single diodes, operating in alternating current (AC) load with a rectified DC output. It is composed of four diodes (two anodes and two cathodes) connected in a “Bridge” configuration, forming a closed rectangular loop. The output of the single-phase full-wave bridge rectifier can range from a full sine to a full square wave and the bridge rectifier filter improves the output of this rectifier.The single-phase full-wave bridge rectifier offers many advantages:

1. High degree of reliability due to absence of center tapped devices;
2. Low cost;
3. Low RMS current thus low heating;
4. Low noise;
5. High ripple factor due less number of output stages;
6. High efficiency due to reduced filter stages;
7. Small size due to minimal parts count.

MBR60100PTE3/TU Rectifier

The MBR60100PTE3/TU single-phase rectifier has a drain current rating from 5A to 10A and a die physical size of 1.5 mm × 5.3 mm, making it suitable for most applications. The device is protected against electrostatic charges and offers an excellent I-V (current-voltage) and T-V (temperature-voltage) characteristics. The MBR60100PTE3/TU is rated for an operating temperature range of -55°C to +150°C and can withstand up to 1.5 KV ESD. The maximum peak reverse voltage (VRRM) is 600V and its forward current rating is 21A. This rectifier can be used both in applications where the voltage across the load is relatively low and in those that require high reverse blocking voltage.In summary, the MBR60100PTE3/TU rectifier is a reliable device offering excellent characteristics for high frequency, high temperature and low voltage applications, designed for single-phase bridge rectifiers and other applications with similar requirements.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description