MIC2595R-2YM-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A hot-swap controller is an integrated circuit (IC) that is responsible for ensuring that components are safely inserted and removed from system power rails. The MIC2595R-2YM-TR is a non-isolation hot-swap controller that has been designed specifically for board-level load-swap applications. The MIC2595R-2YM-TR is a highly integrated device that provides monitoring, control, and protection during the power-up, power-down and operational phases of a load-swap application.

The MIC2595R-2YM-TR is designed to provide a protected load sharing circuit for multiple system power rails. The device provides several features to optimise the transition between power-up, power-down and operational states. These features include circuit protection, inrush current limiting, crowbar current limiting and current limiting on the drain of the external MOSFETs.

The MIC2595R-2YM-TR’s main features include an adjustable output voltage, adjustable output current limit, and overload/short-circuit protection. The MIC2595R-2YM-TR also features adjustable turn-on/off delay, adjustable start-up current limit, and adjustable voltage deviation. The device has a 1.2 V low-side drive voltage and a adjustable 3.3V to 7.8V high side drive voltage.

The MIC2595R-2YM-TR is designed for hot-swap applications and is suited for low-power applications, such as stackable redundant systems and USB hubs. It is also suitable for high power-density systems with multiple point-of-load converters where up to 24V can be present on the main power bus during normal operation. The device can also be used in applications where voltage and current regulation of the power output is necessary, such as with LED drivers, logic supply modules, or processor power blocks.

The MIC2595R-2YM-TR is highly configurable, enabling the user to set the operating modes, current limits, turn-on/off delay, current-limit slew rate, and voltage deviation limits. The delays can be adjusted to ensure that the output voltage reaches its specified level before the load is connected, reducing the possibility of power supply glitches. The input current limit and current-limit slew rate can be adjusted to optimize the handling of inrush current when the load is connected. The voltage deviation limits ensure that voltage transients are minimized during turn-on and hot plug operations.

The MIC2595R-2YM-TR has a wide operating temperature range of -40°C to +85°C. The device is available in a 16-pin thin-shrink small-outline integrated circuit (TSSOP) package. The device is RoHS compliant and is suitable for applications in the industrial, consumer, telecom, and computer markets.

The specific data is subject to PDF, and the above content is for reference