MP4KE13CA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MP4KE13CA TVS diode is a component used to protect electronics in a variety of applications. It is composed of a bilateral silicon avalanche diode designed to respond quickly to transient voltage and to protect semiconductor components against over-voltage conditions. The diode basically forms a path for the transient voltage to ground, and limits the voltage drop on the protected components. This protection is usually done with a 5-volt protection component so that it can safely limit the voltage across the protected device to less than 5 volts. The diode provides over-voltage protection to components in its final state.

The MP4KE13CA functions as a voltage-dependant resistor. A voltage, which has two resistances, is applied across the diode. The lower resistance affects the diode\'s conduction rate and is divided into two resistors. The upper resistance affects the voltage, leading to the back breakdown voltage (clamping voltage) of the diode.

The MP4KE13CA operates in zener mode and has a threshold voltage of 13V. This threshold voltage allows only a small voltage to pass, making it a useful tool for over-voltage protection, surge protection, and protector against high potential. During an overload or any other high-voltage situation, the diode will act as a switch and instantly shunts the excess voltage into the ground, minimizing the associated voltage spikes.

The working principles of the MP4KE13CA are relatively simple and can be summarized as follows: when a voltage greater than the threshold is applied, the diode is triggered, causing the voltage to drop to a safe level. The diode then switches back to its non-conductive state, allowing the voltage to pass through again. The diode does not interfere with normal signal flow.

The MP4KE13CA protection diode is primarily used in communications equipment, medical and industrial control systems, and audio/visual devices. It can be used for protection in a variety of applications, including over-voltage transient protection, noise suppression, power supply and digital circuit protection, and data communications protection. It is also used in automotive systems to protect electrical components from power surges created by lightning strikes and other electric events.

The MP4KE13CA TVS diode is an important component in a variety of electronics applications. It offers over-voltage protection for sensitive components, preventing damage caused by transient voltages. Its simple working principle makes it a reliable, cost-effective solution to keep electronics running smoothly.

The specific data is subject to PDF, and the above content is for reference