MPSA18G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MPSA18G is a PNP transistor made by Motorola. It is a silicon, monolithic, PNP high-gain, high-frequency amplifier. This type of transistor is usually used in audio applications such as amplifiers, audio mixing consoles and audio amplifiers. The transistor is designed to operate over a wide range of temperatures and voltage. It is also designed to provide low distortion and improved power efficiency.

The MPSA18G has an active area of approximately 2.2 x 2.2 mm and its collector-emitter current is rated at a maximum of 0.25A. The maximum junction temperature for the device is 250°C. The collector-emitter voltage is also rated at a maximum of 40V. The transistor is rated to work in the frequency range from 10MHz to 300MHz.

The MPSA18G is a two terminal device and the biasing is done through a collector current. It is important to ensure that the device does not exceed the maximum collector-emitter voltage as this will cause it to become unstable. The transistor has PN junctions that are parallel connected to reduce noise and provide high-gain, high-frequency performance. The gate of the transistor is connected to the base of the transistor.

The MPSA18G has many uses ranging from low noise preamps and audio amp circuits to high-frequency amplifiers. It is also used in other applications such as switching circuits, logic circuitry and power management circuits. The transistor can also be used in many different types of speaker circuits. The device has a wide range of operating conditions and can be operated up to a frequency of 300MHz, making it suitable for a variety of applications.

The device works on the principle of bipolar amplification. It consists of a PN junction formed by two regions, each region being one end of the junction. This junction is referred to as the bipolar junction transistor. When a current is applied to the collector of the device, it causes a voltage drop across the base-emitter junction. This voltage drop causes an inverting current to flow through the base-emitter junction. This inverting current is then amplified by the transistor and is used to control the current through the collector.

The MPSA18G is designed to provide high current gain and high frequency performance. The transistor also has a wide range of operating conditions and is suitable for a variety of applications. It is also designed to have low distortion and improved power efficiency.

The MPSA18G is a great device for any audio applications. It provides high current gain and high frequency performance. The device is also designed to be robust and reliable and can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference