MPSA63_D75Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MPSA63_D75Z is a general purpose PNP transistor and part of the D75Z family of transistors. It has a current gain range of 40–250 and a high peak collector current of 150 mA. This transistor is mainly used for switching and amplification purposes and generally falls under the category of bipolar junction transistors (BJT).

The MPSA63_D75Z transistors are packaged in a TO-92, 1.200 inches, plastic-encapsulated package. These transistors are widely used in a variety of applications, including audio amplifiers, RF amplifiers, relay drivers, motor drivers, digital-to-analog converters, and power switching circuits.

The MPSA63_D75Z transistors have three terminals: the emitter, base, and the collector, and operate with a collector-base junction reverse biased. They are mainly used in switching, transistor amplifiers, and any other common-emitter and common-base applications.

The working principle of the MPSA63_D75Z transistor can be summarized as follows. A small current is applied to the base-emitter junction, which turns the transistor “on”, allowing the current to flow from the collector to the emitter. The current gain of the transistor is proportional to the ratio of the collector current to the base current. In other words, the greater the base current, the greater the collector current.

The MPSA63_D75Z transistors can also be used in configuration with other transistors for more sophisticated amplification circuits. In such cases, the MPSA63_D75Z transistor is used in combination with other transistors, such as the PNP transistors, to form a Darlington configuration. In a Darlington configuration, the MPSA63_D75Z drives the base current of the other transistor, thus allowing both transistors to work in tandem and increase current gain.

The MPSA63_D75Z transistors must be used with care, as they can be damaged by excessive heat or current. It is advisable to check the datasheet of the device before using it in any application.

In conclusion, the MPSA63_D75Z is a general purpose PNP transistor with a current gain range of 40–250 and a peak collector current of 150 mA. These transistors are mainly used for switching and amplification purposes, and can also be used in combination with other transistors for more complex amplification circuits. It is important to take care when using the MPSA63_D75Z transistor, as it can be damaged due to excessive heat or current.

The specific data is subject to PDF, and the above content is for reference