PDTA123JM,315

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PDTA123JM,315 is a bipolar transistor operating in the single, pre-biased configuration. It is a type of transistor with three electrodes--collector, base, and emitter--which are used for switching, amplification, and other functions. In the pre-biased state, the base-emitter voltage, VBE, is greater than 0 volts and the base-collector voltage, VBC, is less than 0 volts.

The collector current, IC, is proportional to the base current, IB, and is limited by the base-emitter resistance, RE. This resistance can be adjusted, allowing the transistor to be used in applications requiring different collector current levels. The gain of the transistor, β, is a measure of the transistor\'s ability to amplify signals. It is proportional to the ratio of IC to IB and determined by the transistor\'s geometry.

In addition to amplification and switching, the PDTA123JM,315 can be used to rectify a signal or current; they can also be used in controlling circuits and as a voltage regulator. In linear amplifier applications, the transistor is typically used in conjunction with other components such as resistors or capacitors. This helps to control the base current, reducing distortion and improving sound quality.

The PDTA123JM,315 has an operating temperature range of -55°C to +150°C, ensuring reliable operation in a wide range of climates and operating conditions. Its maximum collector-emitter voltage is 25V and its maximum collector-base voltage is 30V. The current gain at a collector current of 10mA is typically 100 and its turn-on time is usually less than 10μs.

The PDTA123JM,315 is an ideal choice for a variety of applications, from linear amplifiers to switch-mode power supplies. It is also useful in digital circuits and other devices requiring a high-speed, high-power switch or amplifier. With its high-voltage, low-noise operation, the PDTA123JM,315 is a valuable component in applications such as motors and power regulators.

The specific data is subject to PDF, and the above content is for reference