PDTA123YM,315

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PDTA123YM,315 is a single, pre-biased bipolar junction transistor (BJT) designed for a wide range of applications such as power supplies, rectifiers, amplifiers, switching circuits and so on. It is a PNP device, with a gain of 315, an emitter current rating of 1.2A, and a collector-emitter break-down voltage of 50V. The PDTA123YM,315 is typically used in circuits where current and voltage regulation is a concern. This is due to its ability to operate in either a current or voltage regulator mode. As such, it can be used as a low side, high side, or open collector switch.

The basic principle of operation for the PDTA123YM,315 is related to the fact that a small current at the base can control the flow of much larger currents from the collector to the emitter. When a voltage is applied to the base, electrons are attracted to the base from the collector and forced into the emitter. This results in a decay of the voltage across the collector-emitter. The curve showing the relationship between the base current and the collector current is known as the "transconductance" curve. By controlling the base current, the collector current can be changed, and thus the voltage across the collector-emitter.

The PDTA123YM,315 can be used in a variety of circuit applications due to its superior characteristics and low power consumption. For example, it can be used in power supplies, rectifiers, amplifiers, switching circuits, and other circuits with input and output stages that require precise control. It is also common to use the PDTA123YM,315 in circuits where noise elimination is important. In such applications, the device is used to prevent switching-induced noise from affecting the circuit.

In addition to the applications mentioned above, the PDTA123YM,315 can be used in voltage regulators, where it is used to precisely control the output voltage of the regulator. This is accomplished by adjusting the base current and thus the collector current, resulting in a precisely regulated output voltage. Furthermore, the PDTA123YM,315 can be used as the main switch in push-pull converter circuits, which are commonly used in electronic ballast applications.

The PDTA123YM,315 is a versatile device that can be used in a variety of applications, such as power supplies, rectifiers, amplifiers, switching circuits, voltage regulators, and push-pull converters. It offers superior performance and is easy to use due to its pre-biased nature. The device is an excellent choice for applications requiring both precision and robustness.

The specific data is subject to PDF, and the above content is for reference